R.DesJardin
NAXJA Forum User
- Location
- Clarkston, WA
So I bit the bullet and bought a HF 1T Gantry, not a big HF fan but it has features I liked and thought I would give it a go. Issue is stock sucks and it too narrow to straddle my flat bed trailer. I did some research and actually found a gantry with a similar design to how I widened mine.
3/8" x 8" plate 21 5/8" long with a set of holes to allow me to move the beam mount wider on each size by the hole spacing of ~9 5/8". Sides are 1/4" plate the same length. the inner 4 bolts are full length the height of the beam clamping it all together.
3/8" x 8" plate 21 5/8" long with a set of holes to allow me to move the beam mount wider on each size by the hole spacing of ~9 5/8". Sides are 1/4" plate the same length. the inner 4 bolts are full length the height of the beam clamping it all together.
