fuel rail?

[classicherokee98]

does anyone know any company's that can build a custom fuel rail for the 4.0? i would like the to move the feed line in the back because my turbo is right below the line super heating it.
thank you

 

[offroadordnance]

http://www.wilsonmanifolds.com/products/fuel-rails/std-high-flow-fuel-rail.html

 

[wookieintheforest]

braze on steel AN fittings you need onto the stock rail and remove/cover the port you no longer need. Unless it must look bad a$$....

 

[Alexia]

You could use some DEI heat wrap around the line to solve the issue. I custom made a longer line using some Earl's fittings so I could run the line out of the way of some components.

Both of those solutions are much cheaper than a custom fuel rail.

 

[dobesrgrt]

What was the problem back in june 2012 the thread just ended ?

dobe

 

[classicherokee98]

turned out to be a bad ground by the coil and the coil had a crack in it and the o2 had a broken wire. I just don't know how I over looked those things.lol and for the fuel rail I have dei heat wrap on it. I wraped it 2 time's. what i'm thinkin about doing is flipping the rail 180deg and putting a 90deg fitting on it a see if that works
thanks