XJWheelie
NAXJA Forum User
- Location
- Murfreesboro, TN
I was installing longer flex hoses on the brake lines and when I got to the right front I discovered that someone at some point in time had screwed up the nut on the hard line with pliers or vise grips or something.
Anyway, it's too tight to get off even with my own vise grips, so what I thought that I'd do is cut the hard line about an inch up, put on a new nut and re-flare it. What I need to know is what's the best tool to use when doing this? I've looked at flaring tools and there are several different kinds.
Thanks,
Robert
Anyway, it's too tight to get off even with my own vise grips, so what I thought that I'd do is cut the hard line about an inch up, put on a new nut and re-flare it. What I need to know is what's the best tool to use when doing this? I've looked at flaring tools and there are several different kinds.
Thanks,
Robert