Fiber glass hood?

[I Beamed Jeep]

I need a fiber glass hood but I can't find one??? Any help would be much appreciated atriot:

 

[GrimmJeeper]

are you looking for a race hood (the paper thin one) or a daily driver style that's thicker and braced so it doesn't flex?

 

[GrimmJeeper]

Here are a couple of the thicker ones on carhoods.com. The first has a forward facing scoop and the second is a cowl induction style.

http://e-bodyparts.com/car-hoods/product-pages/FFCH-84MR.htm

http://e-bodyparts.com/car-hoods/product-pages/TFCH-3.htm

 

[X1994J]

Here are a couple of the thicker ones on carhoods.com. The first has a forward facing scoop and the second is a cowl induction style.

http://e-bodyparts.com/car-hoods/product-pages/FFCH-84MR.htm

http://e-bodyparts.com/car-hoods/product-pages/TFCH-3.htm

That second one looks just like mine, only mine is pin on.

 

[I Beamed Jeep]

I want a stock looking one. Thin is fine I'm doing it to save weight.

 

[chris_amrein]

http://www.hannemannfiberglass.com/

I think this is what most Jeepspeeds run.

 

[I Beamed Jeep]

Sweet that's what I want thanks! question is why couldn't I find it lol

 

[Skullver]

Sweet that's what I want thanks! question is why couldn't I find it lol

I have one of those used in good shape, pre-drilled for autofab hoodpins(not included) for cheap if you are interested.

 

[Loose_Nuts_Enterprises]

I have an extra one of the thin ones as well if you need it.

 

[Starboard M]

What kind of weight savings are people getting with a glass hood?

 

[GrimmJeeper]

the thin one weighs about 5-10 pounds I'd guess (at least the one I had was around there). The thicker ones weigh quite a bit more, maybe half as much as the stock hood though.

 

[I Beamed Jeep]

the thin one weighs about 5-10 pounds I'd guess (at least the one I had was around there). The thicker ones weigh quite a bit more, maybe half as much as the stock hood though.

Wow that's pretty light but anything less than stock and I'd be happy. Thanks to the two guys offering the used hoods also pm's are sent half my jeep is used ;-)

 

[GrimmJeeper]

half my jeep is used the other half is broken

 

[crazyjim]

Haha, my entire Jeep was used aside from shocks when I built it in "stage 1" haha.

 

[h-townxj]

Ya I have the race hood it likes to lift up at anything over 30mph but then again I'm using cheap hood pins from autozone. The fit is ok as with most fiberglass parts it was a little short there's a 1 1/2 inch gap from front to back compaired to the old one but once again it don't weight anything and it don't gotta be pretty lol.

 

[I Beamed Jeep]

Ya I have the race hood it likes to lift up at anything over 30mph but then again I'm using cheap hood pins from autozone. The fit is ok as with most fiberglass parts it was a little short there's a 1 1/2 inch gap from front to back compaired to the old one but once again it don't weight anything and it don't gotta be pretty lol.

Well luckily it's a jeep 30mph is hauling lol. Well now I know why most of the ones I seen mounted have like 5 mount points. Fiber glass always makes me sick when I mount it My fenders are mounted so mad I want to redo them but I know I'll just make it worse. Thanks for bringing me down h-town hahaha jk