Diff clearence

[lil_red_wagon]

Im tryin to find out what people have for diff clearence. There are 2 differant reasons. One is my own intrests and the other is for people tryin to figure out how high to go on a lift. That way they can have a idea of differant tire heights compaired to differant diff heights.

If you could post your tire size (claimed and true measurement), your diff clearence from ground to bottom of diff, and your lift size for people to see the lift needed to clear that tire size. Also if you could post your axles too

 

[lil_red_wagon]

Im runnin buckshot QR-78-15 measure 35.5x10.5x15, custom 6" lift, quaters and fenders trimmed, and have 12" clearence from ground to bottom of diff. I have HPd30 and d35.

 

[ExTankerGuy]

Trail or street pressure?

 

[lil_red_wagon]

what do you mean the size with the street and trail pressure? im not sure yet i havent really found out what pressures im goin to run. im kinda worried about airin down with the 35's on a turdy-five.

i have 12" clearance at 25psi

 

[x2elite]

I run about 8 PSI currently on the trail, once I get those beadlocks on there I will prolly run around 3 or 4 psi.

 

[lil_red_wagon]

i used to run 7 to 10psi on my 33x12.5 with stock tj wheels

 

[Exxon Valdez Jeep]

w im kinda worried about airin down with the 35's on a turdy-five.

Air down, you'll like it. Its alot easier to crawl stuff with lower pressure.

 

[lil_red_wagon]

oh i know it is i aired down all the time with the 33's but less air better traction and i have a welded d35 now on 35's

 

[ExTankerGuy]

I have 11.5" under both diffs at 25 PSI. (36x12.50 TSL/SX front and rear 44s)

 

[SpartyKrunk]

I wish I had 4x4.

 

[ExTankerGuy]

I'll check my "trail clearance" when I go on my next trip. I usually run 5 to 5.5 psi.