Dirk Funk
NAXJA Forum User
- Location
- Lexington, Ky
I must drive the Jeep harshly because I've totally fawked my sway bar assembly:
I don't have a caliper to measure it, so I did my best with a ruler and it seems to be 24mm. Please tell me there is some consistency with 93 manual sport, two door, 4-wheel drive Jeeps? I test fit some from Autozone, and they were way too big- visible gap.
Also, I would assume I want these bushings very snug, correct?
Any input is appreciated.
- Bent the crap out of the JKS cotter pin, had to wrestle it out. Do I have to go to JKS direct to get another one? I seem to remember reading that I do.
- Lost the upper button head bolt that connects the JKS disconnect to the sway bar, yes with loctite on it no less. No wonder it didn't feel like the sway bar was working...
- Bent the actual sway bar bracket connected to the axle.
I don't have a caliper to measure it, so I did my best with a ruler and it seems to be 24mm. Please tell me there is some consistency with 93 manual sport, two door, 4-wheel drive Jeeps? I test fit some from Autozone, and they were way too big- visible gap.
Also, I would assume I want these bushings very snug, correct?
Any input is appreciated.