- Location
- Hammertown, USA
Time?
collection of jeep stuff(build/blog)
- Thread starter 831_xj
- Start date
831_xj
NAXJA Forum User
- Location
- Santa Cruz
I'm thinking I'll be off around 3 so I'll head right over
So probably be there around 4
So probably be there around 4
- Location
- Hammertown, USA
send me an address. i'm 95% in.
my boss flies in tomorrow, i just have to make sure he's not counting on me for dinner company.
my boss flies in tomorrow, i just have to make sure he's not counting on me for dinner company.
blondejoncherokee
NAXJA Member
- Location
- sacramento
Pat if you lived closer id totally be there. I am overnighting a ton of heims for my junk and going to be swapping those out tomorrow.
- Location
- Hammertown, USA
Tools packed. I'll see you there.
- Location
- Campbell, CA
Hey buddy! Let me know if you need help after 730-800 monday night.
831_xj
NAXJA Forum User
- Location
- Santa Cruz
I know jondude hopefully be seeing you in the xj next weekend
I still plan to leave fairly early Friday.
That'd be cool I'll shoot you my number and maybe see where were at with it.
If anything could come swing by for a beer or two
Thanks Cal!
I still plan to leave fairly early Friday.
That'd be cool I'll shoot you my number and maybe see where were at with it.
If anything could come swing by for a beer or two
Thanks Cal!
- Location
- Hammertown, USA
831_xj
NAXJA Forum User
- Location
- Santa Cruz
I'm beyond grateful to cal John and seal for coming by and lending a hand! Was extremely generous and I owe you guys big time!
Fronts in might need to adjust the steering wheel and toe. replaced a Heim so might have to adjust tb a bit.
got the rear in solo last night. New u bolts bled the brakes and put gear oil in. Still need the throw the shoes and drums and attach the drive shaft. I think I can make it. But might tow it up there.
Fronts in might need to adjust the steering wheel and toe. replaced a Heim so might have to adjust tb a bit.
got the rear in solo last night. New u bolts bled the brakes and put gear oil in. Still need the throw the shoes and drums and attach the drive shaft. I think I can make it. But might tow it up there.
- Location
- Hammertown, USA
i can probably come down again tonight. can't stay until 11 again though, i get up for work too early and am getting too old to stay up all night 
blondejoncherokee
NAXJA Member
- Location
- sacramento
Did you have to take the rear back to the shop ?
831_xj
NAXJA Forum User
- Location
- Santa Cruz
That'd be awesome Cal I don't have much left to do. Shouldn't be a late nighter again.
Jon we ended up just setting the bl at the warehouse. I didn't have time and the rear end place is beyond busy
Jon we ended up just setting the bl at the warehouse. I didn't have time and the rear end place is beyond busy
831_xj
NAXJA Forum User
- Location
- Santa Cruz
She's alive
- Location
- Campbell, CA
Good job buddy! Back from the dead! Have a great reno run!
831_xj
NAXJA Forum User
- Location
- Santa Cruz
Thanks John man
Everything's dialed in. Gonna swap the pitman arm in Reno with the old stock xj arm until I can file the splines on the wj.
Rigs on the trailer tools loaded. Kind of a mess but I'm ready to wheel I suppose
Everything's dialed in. Gonna swap the pitman arm in Reno with the old stock xj arm until I can file the splines on the wj.
Rigs on the trailer tools loaded. Kind of a mess but I'm ready to wheel I suppose
- Location
- Hammertown, USA
whats wrong with the splines on the wj pitman?
831_xj
NAXJA Forum User
- Location
- Santa Cruz
It's just clocked differently from and xj or tj arm. I could lengthen my drag link but I'd rather keep it similar in length to the tb.
- Location
- Virginia City, NV
Nice work pat.
831_xj
NAXJA Forum User
- Location
- Santa Cruz
Anybody with some gear setup experience with the 8.25? Need some advice or second or fifth opinions
- Location
- Hammertown, USA
What's going on?
