built chrysler 8.25

[kraziexj]

xj chrysler 8.25 29 spline
4.88 gears
aussie locker
superior axle shafts
ruff stuff diff cover
trussed
converted to use u-bolts on yoke instead of straps
new brake hardware
stock axle shafts also included

setup for spring under yj, but I can include a set of ruff stuff spring perches if you wish to go spring over.
$600 obo

 

[kraziexj]

I took a disco dana 30 in on trade. It has 4.88's and a lock right. All brackets have been removed from the axle.

$850 for the pair.

If no one buys the pair, I will eventually part them both out.

 

[MKR5150]

Where in KS? May have interest in both if not too far.

 

[nick86]

I took a disco dana 30 in on trade. It has 4.88's and a lock right. All brackets have been removed from the axle.

$850 for the pair.

If no one buys the pair, I will eventually part them both out.

price is right , but a bit steep for 32's.

 

[XJ&CHZ4ME]

Where in KS? May have interest in both if not too far.

I believe Mike is located in Andover, KS if I remember correctly. He is a great guy and cool to deal with. :thumbup:

 

[kraziexj]

Thanks Tyler! I am in Andover KS. This coming weekend (April 30-May1) I am picking up a new to me trailer in KC so I could have them that far this weekend only.

 

[MKR5150]

Sadly I have to retract my interest, just not in the cards this month.

 

[kraziexj]

Now parting and here's what I have:

$225 chrysler 8.25 aussie 29 spline
$110 superior chrylser 8.25 xj 29 spline axle shafts (2 included)
$75 chrysler 8.25 xj 29 spline carrier, spider gears, 2 axle shafts (29 spline conversion)
OR $30 carrier + spider gears and $30 per shaft.
$125 dana 30 lock right
$25 dana 30 3.73+ carrier
$40 dana 44 30 spline full spool 3.92+
$20 beefed up dana 44 cover
$70 xj dana 44 axle shafts long side is good, the short side has slightly twisted splines. would make a good trail spare

Stock dana 30 parts:
$10 stock dana 30 covers (have 2)
$15 stock dana 30 spider gears
$10 stock dana 30 rotors (have a bit of surface rust from sitting but should clean up)
$10 yoke (strap version)


Will be traveling to KC this weekend.

 

[XJ&CHZ4ME]

Mike, I am interested in the Superior 29 spline shafts. If they are still available, PM me. Thanks.

 

[jakeWI]

interested in the D30 lockright depending on condition and current mileage?

 

[kraziexj]

Mike, I am interested in the Superior 29 spline shafts. If they are still available, PM me. Thanks.

Sorry Tyler, the shafts are sold.

 

[kraziexj]

interested in the D30 lockright depending on condition and current mileage?

I took it in on trade and was told it was a year old. It is in good condition. I can take pictures if that would help.

 

[jakeWI]

I took it in on trade and was told it was a year old. It is in good condition. I can take pictures if that would help.

Yeah that would be great if you could. I am def. interested!

 

[kraziexj]

Yeah that would be great if you could. I am def. interested!

I took pictures of some of the other stuff too. Pictures of the chrsyler 8.25 aussie are in there as well (the mileage on it is 500 miles), but I labeled which ones are which.

http://s91.photobucket.com/albums/k292/kraziexj/for%20sale/

 

[jakeWI]

Thanks for the pictures.

I am going to have to pass for now. Nothing wrong with your price. I just can't budget it at least this pay period.

 

[kraziexj]

Sold over half of the above. I have a few more parts to order and parts to take off so I will start a new thread at that point.

This thread can be deleted.

 

[DeftwillP]

Pm sent on aussie


Sent from tapatalk on iJunk