break lights help

[snowboard3r411]

ok on my 89 comanche all my lights work but the break lights.
ok so i got my test light out and i have no power going into the break light switch. so then i made sure the fuse was working and it is working fine. so heres my new question the wires for the break switch are pink and i think the other is blue. now i have a few loose connectors hanging out the dash and one of them has a pink wire and i tested it and its hot and its a pink wire like i need so i was woundering if anyone can reconize these two plugs. the first pic is the one i think i need to get plugged in some where to get the light working

this connnector is also loose

and there both coming out of this hole

any help would be great thanks guys

 

[tagordon]

Here is a link to the wiring diagram:
http://f1.grp.yahoofs.com/v1/wDgVTK...IlZ4zYSOBAoY/1989-1989 XJ Wiring Diagrams.pdf

Hope this helps,
Troy

 

[JJacobs]

Bad link.

So, there's actual voltage at the fuse? Just cause it's not blown doesn't mean it's running power through it.

What happens if you take a small chunk of wire, put one end on the downstream side of the end of the fuse (there's a bare spot on the fuse for this sort of thing) and touch the other end of that jumper wire to the output side of the brake switch harness? Do the brake lights come on?