before the crawl my junk needs.....

[94xjsport94]

Here is the link, can edit it into my original post...

http://www.naxja.org/forum/showthread.php?t=946575

 

[Cottontail]

Slowly but surely ----

new u-joint in front drive shaft - DONE
new driveshaft straps - DONE
new front pinion yoke - DONE
repair spring holder on drivers side DONE
repair snapped off bolt in the differential housing -DONE
Replace fluid in rear axle DONE
Repair broken track bar DONE
Get one new 31" MT DONE
Pick up spare long shaft DONE
Pick up spare short shaft DONE
Route cowl air induction system DONE
Mount new spare on factory rim
New negative battery cable
New ball joints DONE
New tie rod to pitman arm
New tie rod to left steering knuckle
New tie rod end at the left steering knuckle
Replace Durango steering box with OEM (Maybe - if the new steering doesn't fix what needs fixin')
Replace front skid plate
Oil change

 

[bwfdrums]

Here is the link, can edit it into my original post...

http://www.naxja.org/forum/showthread.php?t=946575

Sweet. I just now saw this thanks so much!

 

[highspeed]

Havent made a list but picked up some trail spares today for the d30. Picking up some 8.8 spares on Thursday. Got a fire extinguisher today as well.

Anyone need v8 steering ZJ parts. Was one at thr JY but i have currie and dont need it. LMK

 

[Cottontail]

new u-joint in front drive shaft - DONE
new driveshaft straps - DONE
new front pinion yoke - DONE
repair spring holder on drivers side DONE
repair snapped off bolt in the differential housing -DONE
Replace fluid in rear axle DONE
Repair broken track bar DONE
Get one new 31" MT DONE
Pick up spare long shaft DONE
Pick up spare short shaft DONE
Route cowl air induction system DONE
Mount new spare on factory rim
New negative battery cable
New ball joints DONE
New tie rod to pitman arm DONE
New tie rod to left steering knuckle DONE
New tie rod end at the left steering knuckle DONE
Replace Durango steering box with OEM (Maybe - if the new steering doesn't fix what needs fixin')
Replace front skid plate
Oil change DONE

 

[beer_goggles_009]

My updated list:

New spare rear drive shaft
new winch rope
Find and fix the clunk in my front drive line (only 2 options left T-case or gears)

 

[Ghost]

Drag link and winch..... I sure could use a spare shaft but IDK that will happen. Need to fix that damn seat too!

 

[Lowrange2]

I got some seats for ya if you want them... They're dirty but they aren't broken.

 

[Ghost]

I got some seats for ya if you want them... They're dirty but they aren't broken.

Just saw that and commented.... :twak:

 

[PacificEd]

I need new seats too. My drivers bolster is broken.

 

[Ghost]

I need new seats too. My drivers bolster is broken.

Well I need the pan on one for sure. If I end up not using both or If I have the rest of the seat available you want it?

 

[BRIANHO13]

I need to finish cage, install rear seats, install front locker, and rear discs.

 

[DoWorkXJ]

My list is too long to list...

 

[POLAR_JEEP_04]

My list is too long to list...

X2

 

[Wayne Sihler]

Well mine developed an exhaust leak at the head,,,looks like a blown gasket or cracked pipe. Tightening the bolts didn,t help.

 

[1989TwoDoor]

To do:
Register for crawl
Swap out rear leaves
Install shackle relocation kit
Weld cage to shackle relocation kit
Raise the shock mounts on rear axle
Replace windshield, if time alows

 

[highspeed]

After this weekend, my junk needs a 33" MT tire!

 

[Ghost]

Well the winch is fixed and will be to me today. Needed a new armature bearing and motor. The armature bearing was gone and the brake was slightly engaging. So that is why it would barely free spool! The free engage lever is fixed too. Now I just need to get in touch with Ironman Andy and get my drag link back then I can move the jeep again!

 

[Lowrange2]

Well the winch is fixed and will be to me today. Needed a new armature bearing and motor. The armature bearing was gone and the brake was slightly engaging. So that is why it would barely free spool! The free engage lever is fixed too. Now I just need to get in touch with Ironman Andy and get my drag link back then I can move the jeep again!

Glad that's fixed so I won't have an aneurysm while trying to pull some cable on your winch for it to not work after we get it hooked up.

 

[Ghost]

Glad that's fixed so I won't have an aneurysm while trying to pull some cable on your winch for it to not work after we get it hooked up.

Yea Gulches trip was the last straw.... Wasn't too bad either IMHO! $250.00 Much better then a $500 - $700 price tag on a new one!