Barrio Fabworks 8.8 teaser...

Gil BullyKatz

NAXJA Forum User
Full width 8.8 (F-150) w/ 35"s...

DSCF0009.jpg


More to follow...

Full write-up with english translation in works
 
Last edited:
can we get an ebonics translation too please. :)

cheers,

jj
 
Rev Den said:
and another reminder....

Dont forget to get the correct u-bolts...and torque them.


Rev

Funny you should mention that...

MORE's u-bolts are too short for my grande leaf packs...

but long enough for mock-up purposes...

What's the reccomended torque setting for them anyway?

white knuckle, red face or inguinal hernia?

Brett...IIRC the WMS to WMS was about 64-65"...
 
Gil BullyKatz said:
Funny you should mention that...

MORE's u-bolts are too short for my grande leaf packs...

but long enough for mock-up purposes...

What's the reccomended torque setting for them anyway?

white knuckle, red face or inguinal hernia?

Brett...IIRC the WMS to WMS was about 64-65"...
Depends on the diamater of the u-bolt.
For your's, I would say 100lb/ft and retorque them after a couple of weeks.
 
Gil BullyKatz said:
Funny you should mention that...

MORE's u-bolts are too short for my grande leaf packs...

but long enough for mock-up purposes...

What's the reccomended torque setting for them anyway?

white knuckle, red face or inguinal hernia?
Okie Terry said:
Depends on the diamater of the u-bolt.
For your's, I would say 100lb/ft and retorque them after a couple of weeks.
IIRC ... a Chiltons Manual recommended 65-70 ft/lbs for stock u-bolts which are 1/2" dia. I used 9/16" dia. u-bolts and torqued them to 80-85 ft/lbs.

I agree with Okie T ... "For your's, I would say 100lb/ft and retorque them after a couple of weeks." :laugh3:

Les
 
jerk

my write up will be first... damn you

now- lets see who's hp d44 goes in first!


sierra VS MWC Rumble!
 
XJ_ranger said:
sierra VS MWC Rumble!

Jumping ship just because of a little relocation?
 
Dirk Pitt said:
Jumping ship just because of a little relocation?

hell no

just saying that i am currently not in the MWC and am webwheeling from my station in CA

i am a mwc guy at heart
now and forever

it was either :sierra VS MWC
or Nebraska guy in CA VS Illinois guy

sierra VS mwc just seemed more fun
 
XJ_ranger said:
i am currently not in the MWC

Says who? According to the rules:
Bylaws said:
Section 2: Chapter Membership
b. After a Chapter has been formed and approved by the Board of Directors, membership in any Chapter shall be open to all Members of the Corporation, irrespective of place of residence. Members of the Corporation may declare and hold membership in more than one Chapter simultaneously.

Rev
 
x2, REV. I'm still a member of the NAC (emphasis on member.) The MWC is more fun though, and we have a better sticker.


How's your application process for Colorado Chapter membership going?
 
Back
Top