98stocker
NAXJA Forum User
- Location
- Newbury Park, Ventura County, CA
My 97 won't start. If anybody has a wiring diagram they would fax or email or tell me where to get one quickly that would be great. It cranks fine, battery fine, fuel pump fuse and relay are working and relayed power is leaving the relay, but not getting back to the fuel pump(checked at the connecter above the rear axle). No spark either. Check engine light not on, but I put the scan tool on it anyway and get an error message from my cheap scan tool. So I am thinking computer. Changed computer with no symptom change. Still get error message, no fuel, no spark. I pulled apart every electrical connecter I could get my hands on and cleaned them up, but they all looked fine anyway. Tested the crank sensor and it tested at 0 ohms across the 2 and 3 connections which is what haynes seems to think it should.
Actually if anybody had even the wiring for the just the aldl, that might help.
Thanks.
Oh yeah, more data... The fuel gauge usually shows the fuel level when the key is in the on position, but not currently doing so. The idiot lights do turn on for a few seconds when the key is turned on like normal however.
Actually if anybody had even the wiring for the just the aldl, that might help.
Thanks.
Oh yeah, more data... The fuel gauge usually shows the fuel level when the key is in the on position, but not currently doing so. The idiot lights do turn on for a few seconds when the key is turned on like normal however.