90 xj, 2wd stocker, t boned. parts only

[jumpnjeep]

Title says most of it. It's a badly t boned stocker, 2wd, I'm taking it apart now. Any parts requests post up or text me. 626-278-2421 Asa

First come first served, will hold parts if it's a reasonable request.
Everything is make offer.

[/IMG]

[/IMG]

[/IMG]

 

[Johnnie Walker]

Should be 91+ , unless the rear hatch is from a different heep, Does the front 2wd axle have spindles or stub shafts? Stick or auto?

 

[jumpnjeep]

Ok then it's a 91. The tag is late year 90. I will have to check the front axle for you, and its an auto.

 

[jumpnjeep]

Looks like spindles on the front axle.

 

[Johnnie Walker]

Ok then it's a 91. The tag is late year 90. I will have to check the front axle for you, and its an auto.

Looks like spindles on the front axle.

Okay, I already have one of those POS beams in my MJ.
I know it's already F'd up, but did this still run/drive when you got it? Rear a Turdy5 or C8.25?
I know you're kind of far, but I need powertrain for my MJ. So, I'm considering my options.

 

[jumpnjeep]

Okay, I already have one of those POS beams in my MJ.
I know it's already F'd up, but did this still run/drive when you got it? Rear a Turdy5 or C8.25?
I know you're kind of far, but I need powertrain for my MJ. So, I'm considering my options.

Well you just missed the front axle, but yes it was/is a running Jeep. The engine is why we have it. Need that for my buddies xj.

[/IMG]

That's the rear end, I think it's an 8.25. The tubes measure 3". As far as I know the trans is still good. Text me for quicker response if your interested or have more questions.

 

[GrimmJeeper]

unless that's a REALLY bad angle, that's a d35. 8.25 has a flat bottom just below the bottom lip of the cover.

 

[Jays siik xj]

What color interior?

 

[GrimmJeeper]

What color interior?

looking at that hit, i'm betting the drivers seat is very brown.

 

[jumpnjeep]

looking at that hit, i'm betting the drivers seat is very brown.

Lmao Mike.

Ok it could be a 35, I'm not very good at axle I.d.'s. I looked at my 8.25 and they looked close, the axle tubes measure 3" I don't know if that helps.

Also the interior is Grey or what's still usable anyhow.

 

[Lurch]

I'll take the front floor mats if they're in decent condition.

 

[jumpnjeep]

I'll take the front floor mats if they're in decent condition.

I will check for you and put your name on them. I'll post up pics when I go over there so you can make a decision.

 

[Jays siik xj]

looking at that hit, i'm betting the drivers seat is very brown.

Couldn't be much worse than the seats you gave me. Hahahhaa

 

[jumpnjeep]

Update:
Hood and front axle- xjpapercut
Driver seat, engine and exhaust- spoken for by owner
Floor mats pending inspection of condition- Lurch


Any other requests post up or text me.

 

[jumpnjeep]

Update:
Hood and front axle- xjpapercut
Driver seat, engine and exhaust- spoken for by owner
Floor mats pending inspection of condition- Lurch


Any other requests post up or text me.

And:

Rear door panels, and all 4 seat belts- Jay

 

[Lurch]

Asa -

In addition to the floor mats I'll also take the 'Jeep' emblem off the front clip and the front bump stops if they're not trashed.

 

[garrett83]

I have a buddy that needs the steering shaft from the firewall to gear box

I'd like the roof from the bottom of the A pillars back and the rear hatch. I don't need the glass, just the lower part of the hatch to cut up as I need.

Maybe I can grab up body from you when you get it all parted out. Then I can just cut off what I need.

Oh, and the driver side front fender....

 

[jumpnjeep]

Asa -

In addition to the floor mats I'll also take the 'Jeep' emblem off the front clip and the front bump stops if they're not trashed.

Lurch, yeah no problem on the bumps, I think they are still in good shape. The jeep emblem and front clip might be in the trash already, but I think I have and emblem I never used that I can give you.

I have a buddy that needs the steering shaft from the firewall to gear box

I'd like the roof from the bottom of the A pillars back and the rear hatch. I don't need the glass, just the lower part of the hatch to cut up as I need.

Maybe I can grab up body from you when you get it all parted out. Then I can just cut off what I need.

Oh, and the driver side front fender....

I would much prefer that you just take the whole chassis, would save me alot of time and effort. Give me a week to pull a few more pieces of and we can arrange pick up.
The driver Fender is kinda mangled but it's still there I will leave it alone, maybe you can salvage it.

 

[garrett83]

Sounds like a plan

I'll PM you my number

 

[jumpnjeep]

Pm received, text sent.