2000 XJ For Sale

mahall

NAXJA Forum User
Location
CT
$1500 Automatic, ~108k, High Pinion D30 front with 4.56s and Aussie locker and homemade truss, Chrysler 8.25 with 4.56s and Aussie locker, 32x10.5 tires, 4.5" RC lift, Crossover steering with Ruff Stuff heim joints, Short control arms - fixed Teraflex lowers adjustable RE uppers, control arm drop brackets, RE track bar with drop bracket, aftermarket tailight housing and lights, custom front and rear bumpers.

The bad: two windows are currently broken, far back passenger side and rear hatch. I have a new hatch to go with it though. Also, the cylinder head has a small crack. Low miles since the crack, no bottom end noise. Evap canister check engine light. The rockers are rusted.

00505_4mvHD3ANbD5_600x450.jpg



Check out the craiglist ad for Pictures: http://nwct.craigslist.org/cto/3989884843.html
 
It has been a while since I've driven it that far but it has never let me down before. It is able to cruise on the highway, no deathwobble or annoying bumpsteer
 
Yes axles are working. You are welcome to drive it around. I'm in Harwinton, CT, not too far from you
 
Is anything leaking? Any weird noises from the axles? Any problems with them? Have any pictures?

Last axle I bought was ... eeer half broken so I'm pretty cautious now.

Lowest you'd go is $1,000 cash?
 
No leaks. Typical luchbox locker noise - ratcheting when doing low speed turns around a parking lot for example. No issues with the axles, last issue I had was early this summer was a bad u joint on the front drive side, replaced it and did new ball joints on that side as well.

It has Solid brand ribbed diff covers front and rear. I think the rear has a lube locker and the front is RTV if I remember correctly. It also has Axle Tube Seals on the front, I believe made by Alloy USA.

That is my bottom dollar, I think anything less and I'd wait until I have the time to part it out. Who knows when that'll be...

I can text you better pictures tonight, can you do picture texts?
 
Back
Top