Recent content by CV95XJ

hey guys, Im starting on the cooling system, with my project. Its got a rebuilt chevy 350 in it. I have a 160 t stat, electric cooling fans, and Im wondering what radiator I should use. I'll probably do some hood vents also to help with overheating. I have heard novak adapters, but I can't...

that is the last resort at this time, ive seen that post, but mine isn't as hardcore I will be driving mine on the street so I would like to keep the integrity of the "frame" What I really want to know is, If I run 2 different headers, (one comes down in the middle of the block, other comes...

hey guys, anyone have any experience with what headers to use for a small block in a comanche? or maybe even an older cherokee? I am using the advanced adapters motor mounts. I just tried a set from summit, they are block huggers and exit straight down, but their is not enough room for them...

alright , the front is a low pinion 44, and the angle is pretty steep, would a good plan be to run a double ended cv setup with 1310's? also the yoke on the rear dana 60 is quite a bit bigger than the front, is that a 1350?

hey guys, I need to order driveshafts soon and I am curious to learn about how yokes are measured. I always hear numbers like 1410, 1350 and so on but don't really know what it means. I have 3/4 ton chevy axles under my jeep and an np 205 t case. just wondering how it works. also I was...

ttt one more time and its going on ebay

ttt one more time and its going on ebay

lol, yeah no problem!! I did actually take it down the gravel road a little ways cause I wanted to get a shirt from the place, Almost got ran over by some wranglers though.

are you parting? if so dibs on rugged ridge steering

ttt

ttt new price 4000$

thanks! also forgot to add, its got TJ fender flares on it

its time to move on, so this has got to go. 1997 jeep cherokee sport 4x4 148k, green exterior, gray cloth interior 4.0L, auto, np231 d30 front, 8.25 rear (4.56 gears) RE 5.5 inch lift with longarms BFG mud terrains set of 5, 33x12.5x15 mounted to Black steel wheels (soft...

umm, i had a templates for the outer boxes, but Im sure their lost now, I pretty much got the 2x4 main part mounted up, and then traced the body lines onto cardboard, then cut 2 pieces like that and welded them straight on the face of the 2x4, then just built the rest of the box off of that.

had a few good ones, thought Id share here I am at turtle ridge orv park on drummond island . . . . . . . . . . . .. . . . . . . . . . . . with the wrong vehicle and heres some fun at the shop last night, back to backs. I needed to hook the strap lower on the quad I was just pullin...