RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
So after doing my WJ/KJ brakes, I have poor pedal travel. I spent most of the day(and night) reading all the different forums looking for some info on a larger MC that will fit a late model vac booster. I looked at over 500 MC specs and came up with some possibilities. Going to make some phone calls today! Not sure about the size needed but its a start. Just for reference here are the ratio's for factory parts with some different MC's. I'm leaning towards the 1-1/16" to start.
Using my 2000 with a 1" bore as a baseline.............
Front XJ caliper - 6.72/1 (x 2)
Rear wheel cylinder - (-).66/1 (x2)
KJ rear caliper - 3.77/1 (x2)
WJ front caliper - 3.77/1 (x4)
Here are some WJ/KJ #'s with different MC's...........
1-1/16" MC - 3.34/1 (x6)
1-1/8" MC - 2.97/1 (x6)
Using my 2000 with a 1" bore as a baseline.............
Front XJ caliper - 6.72/1 (x 2)
Rear wheel cylinder - (-).66/1 (x2)
KJ rear caliper - 3.77/1 (x2)
WJ front caliper - 3.77/1 (x4)
Here are some WJ/KJ #'s with different MC's...........
1-1/16" MC - 3.34/1 (x6)
1-1/8" MC - 2.97/1 (x6)