- Location
- Campbell, CA
3 Link finished minus some paint. I got the axle tower installed and checked for any clearance issues and it fits great. I have almost 5.5 inches of frame seperation and 8.5 inches axle seperation. Lower arms are at 8.5 degrees and upper is at 1.5 degrees. I usually have a lot of weight camping so didn't want upper flat or negative loaded down. I wanted to make sure even loaded the front would not act weird when braking. I have driven it about 10 miles and it really feels good. Feels good when braking, more dive than old steep angled short arms(feels natural) Its a lot smoother going down the road and leans less in the corners.
I did try to use 3 link calculator and seems to be about 97-100% Anti-Dive. But Anti-Dive number changes a lot by just changing COG # Its kind-of a rough estimate. I think its gonna work good on the trail, need to do a shake down run to hollister soon!
I did try to use 3 link calculator and seems to be about 97-100% Anti-Dive. But Anti-Dive number changes a lot by just changing COG # Its kind-of a rough estimate. I think its gonna work good on the trail, need to do a shake down run to hollister soon!