WTT my stationary windows

[Jays siik xj]

For some wing windows... the lil triangle windows on the front doors.

 

[TheLaredo]

Would so trade you but my driver side one is screwed up lol

 

[casual]

Jay I've got them and they work..you know how to get them out without XXXXing them up lol?

 

[GrimmJeeper]

You have to take the window out, then unbolt the assembly from inside the door at the bottom. then there is a torx screw that goes in on the front edge of the door that holds it in from the top (kind of above the mirror). tilt it to the side and pull the whole assembly up and out.

installation is reverse of removal

 

[GSequoia]

You have to take the window out, then unbolt the assembly from inside the door at the bottom. then there is a torx screw that goes in on the front edge of the door that holds it in from the top (kind of above the mirror). tilt it to the side and pull the whole assembly up and out.

installation is reverse of removal

I've never had to remove the main window, I've always been fine just having the window completely rolled down then pivoting the wind wing out.

 

[Johnnie Walker]

I have some in some spare doors, but since the door are electric I dunno how to roll the window down.
My current XJ is manual windows, so I cant just plug the connector in to get it down.

 

[Jays siik xj]

I've never had to remove the main window, I've always been fine just having the window completely rolled down then pivoting the wind wing out.

X2. They're pretty easy to get out