WTB nut strips in the Springs.

[Joe94xj]

Looking to see if any of you local springs guys have any nut strips for a hitch install? Just nees one for the driver side.

 

[Fred]

They aren't real hard to make. Even I managed to make a couple.

 

[dan1977p]

They aren't real hard to make. Even I managed to make a couple.

Got specs? I'm about to build up a jcr diy rear and realized it doesn't have the hardware.

 

[Fred]

No. Just take a 1" or so flat strip of steel, slide it in the rear frame hole behind the bumper, get it centered over the three holes in the bottom of the frame rail, center punch it, drill it out a little larger than the bolts you are using, tack nuts that fit the bolts centered over the holes. If you have the external piece already drilled to fit, you can easily model off of that. There is some room for slight variation, otherwise what I made wouldn't fit.

 

[Swamprat]

i think i have some in one of my boxes, i'll dig for it

 

[jdxj]

Got specs? I'm about to build up a jcr diy rear and realized it doesn't have the hardware.

http://naxja.org/forum/showthread.php?t=983110

 

[Swamprat]

so i dont have them anymore sorry