WTB 77.5 to 79 HP44 out of F250

[terrystasko]

The title says everything.
I found only two of these axles in a 144mile radius, but would rather give my money to someone from the forum/friends of the forum.

(330) 651-1864
Terry

 

[terrystasko]

I know this is tough one, but I'm surprised nobody has any leads.

 

[midmichxj]

I have an empty housing. No knuckles or anything. $150

 

[jester1084]

I've got an extra one. What year exactly, I don't know. It's got the thick tubes and welded on brackets. Otherwise it's pretty well bare. I just put it up in storage to get it out of the way but I can take some pictures if you're interested. (Racine, WI)

 

[dozer_xj]

This is not EXACTLY what your asking for but I have this:http://www.pirate4x4.com/forum/showthread.php?t=825938

 

[et89xj]

Why the f250 axle? The long side shaft is about 1/2"-1" longer then the f150 axles. What's your price and how many do you want?

 

[terrystasko]

Holy sh@t!!! Thanks for all the replies!

I am cutting it down to stock width, and I can get a hold of some really cheap inner C knuckles but the axle tube diameter needs to be 3"
The years I have listed are important because they are 3" axle tubes, high pinion, and wide enough I can just chop saw the ends off.

I would prefer a bare axle, since I'm going to use all new parts.

 

[terrystasko]

This is not EXACTLY what your asking for but I have this:http://www.pirate4x4.com/forum/showthread.php?t=825938

Doser, This would be great if it was high pinion...sorry and thanks anyway.

 

[lilredxj99]

I know where there is a whole truck that runs w/ hpd44 and a d60 rear 500

 

[dozer_xj]

Doser, This would be great if it was high pinion...sorry and thanks anyway.

People put to much importance on HP. All the chevy and dodge guys fun LP. Ill sell you the housing and gears only if you want

 

[whitexj(99)]

I've got what you want, the 1979 F250 Dana 44 front bare housing. I also have a front Dana 44 from a J-10 truck for the outer knuckles (Chevy knuckles), disk brakes, and 6 on 5.5 bolt pattern (Matches the Isuzu rear Dana 44 or the Corporate rear end found in the Rodeo/Amigo). I also have the Wagoneer axle shaft needed to narrow the axle down to be close to stock XJ width. And I have new Warn premium manual locking hubs. Problem is I'm in Montana. If you ever get out this way I would take $400. The package still needs a locker, gears and the mounting hardware.

 

[terrystasko]

People put to much importance on HP. All the chevy and dodge guys fun LP. Ill sell you the housing and gears only if you want

I agree, but I'm running a T&T long arm and the pinion would hit first, so I need a HP.
If I can't find a HP I will hit you up...Thanks!

 

[dozer_xj]

I agree, but I'm running a T&T long arm and the pinion would hit first, so I need a HP.
If I can't find a HP I will hit you up...Thanks!

Ill cut you a screaming deal on the LP:sad1:
I Have a HP 8lug in my jeep now. High steer, 4.10 open. PM me and we can work out a deal
This is my jeep. check out the pics of the axles and let me know.:
http://www.pirate4x4.com/forum/showthread.php?t=742762