I'm replacing my broken center pin in my leaf Not going to use the leafpacks I bought from the guy in Dallas. So they are available I hope to replace the coils before then too. Will put in new front bump stops and hockey pucks while I'm at it.
Need to figure out why I'm having a problem stalling at idle
lets see, i need to get my new gas tank assembly on, 4x4 swap, rebuild my d30/8.25 combo, slightly more lift, make a rear driveshaft, make a rear recover point, figure out why my CB set up doesnt work anymore, install a muffler, and finally get a radio in it.
Finish installing new trackbar and mount.
Change out uca bolt with custom plastic bottle cap nut.
Change out some tre's.
Install new rear bumpstops and possibly fronts if they work with my softballs.
Fix blinker issue and headlights.
Maybe install new clockspring so I have cruise control for the drive.
Swap rear leafs if I'm feeling froggy.
still have axle swap
4x4 swap
sye install
steering to be fabrbicated
rear recovery point (bumper) to be fabricated
cooling system to be gone over
CB radio fiddled with
driveshafts made
a secure gas tank mount fabricated
some proper coils and shocks found/installed
and if i have time sliders fabricated.
Finish installing new trackbar and mount.
Change out uca bolt with custom plastic bottle cap nut.
Change out some tre's.
Install new rear bumpstops and possibly fronts if they work with my softballs.
Fix blinker issue and headlights.
Maybe install new clockspring so I have cruise control for the drive.
Swap rear leafs if I'm feeling froggy.