muddypunk
TOOL
- Location
- Coupeville Whidbey Island washington
How was it Ben Would you say easy drive because I plan on driving down there this fall after the dust goes down some .
What did you do to your XJ today
- Thread starter Cherokeefever
- Start date
BenDiesel
NAXJA Forum User
- Location
- lynnwood washington
i would say if you have a 3 inch lift and 31 you can do almost every thing there.
shortly after posting thoues picts i went to unload the jeep and truck to discover that my truck was broken into and the radio and my ar15 and my sog knife and streamlight flashlight were stolen
shortly after posting thoues picts i went to unload the jeep and truck to discover that my truck was broken into and the radio and my ar15 and my sog knife and streamlight flashlight were stolen
jeremybigs
NAXJA Forum User
- Location
- everett
put a new sticker on today
jeremybigs
NAXJA Forum User
- Location
- everett
o i guess i should of posted this pic too
PDXGraham
NAXJA Forum User
- Location
- Portlandia
...looked at it...
muddypunk
TOOL
- Location
- Coupeville Whidbey Island washington
BenDiesel shortly after posting thoues picts i went to unload the jeep and truck to discover that my truck was broken into and the radio and my ar15 and my sog knife and streamlight flashlight were stolen[/QUOTE said:
BenDiesel
NAXJA Forum User
- Location
- lynnwood washington
I pulled in at 9 pm on Sunday and when I went out on Monday it was missing
Scorpion8
NAXJA Forum User
- Location
- Juneau, AK
Replaced all the plug wires, and fixed my hazards. Replaced a LOT of split-wire-loom that had become old and dry/brittle.
McJesse
NAXJA Forum User
- Location
- Battle Ground/WA
Got a little more work done to the half doors. both of them are pretty mucha ll welded up and tomorow i am probubly gonna get to know how to bondo. nothing crazy just learning more and more everyday
xj98xj
NAXJA Forum User
- Location
- San Clemente ca
Kinda funny, a little scary!!!! Took off the back corner plastic bumber caps and the metal brackets that are riveted to the body. Decided to throw a little weld in the holes to patch them up and then sand and weld down and paint... I didnt realize there was some extremely flamable exper foam and about burned my jeep to the ground. thank god I was 2 feet from the garden hose!!!
I guess I'll use bondo!!!
I guess I'll use bondo!!!
josefxj97
NAXJA Forum User
- Location
- Bonney Lake, WA
bought some parts this week for it. still havent driven it since NWFest
muddypunk
TOOL
- Location
- Coupeville Whidbey Island washington
Washed it real good
BoringDave
NAXJA Forum User
- Location
- Boring
Drove it to work today. For one reason.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
You are a smart man!
Anyone that removes perfectly good a/c to replace it with a home made air compressor is a whack job.
I was hating you last year when I was behind you in the dust,heat and total discomfort. You were just kicking up the dust windows up a/c on close to 100 outside.
I may have to put a/c in the Wrangler.
Dave
Cherokees are for children. Grown ups save and get wranglers. Im tired of being childish.
- Location
- NE Texas
I can use A/C about 9 times a year.. I can use OBA about 9 times a day..
Just sayin'
I have both...
Also I definitely use the a/c more than 9 times a year, once it gets above 70, driving all the way to Pendleton with the windows cracked gets damn old...
Bronzewyrm
NAXJA Forum User
- Location
- Independence,or
I have both...
Also I definitely use the a/c more than 9 times a year, once it gets above 70, driving all the way to Pendleton with the windows cracked gets damn old...
Dont let'm hate on ya. everybody wants a late model :smoker:. heay scott hows that lether treating you these days?:scared: im kicking around the idea of a CO2 tank. i installed one on a JK, he said it does wonders. got me thinking
Bronze.
Keekleberrys
NAXJA Forum User
- Location
- Issaquah
Finished up my install of my rigidco fbw2 winch bumper.
Ran into some trouble with the transmission cooler and had to take the grill off to drop down and run the hardlines throught hole provided by RIGIDCO. It's a tight fit, will probably replace hardlines with rubber hoses when I upgrade my tranny cooler later on. Small hurdle that was easily overcome.
slowly but surely things came together, and were torqued to the specifications provided by rigidco.
Winch support installed:
winch installed on top of winch support:
complete install crappy cellphone pic that i will replace tomorrow with better one.
Only true problems i had was keeping track of all of the different mounting hardware.
I am extremely impressed by the reinforcing bracket directly below the radiator. I have not seen any other bumper manufacturer include anything similar, and I feel it adds a lot to the rigidity of the bumper, as it is off the same thickness and provides a good bracing factor to the "uniframe". lulz
Ran into some trouble with the transmission cooler and had to take the grill off to drop down and run the hardlines throught hole provided by RIGIDCO. It's a tight fit, will probably replace hardlines with rubber hoses when I upgrade my tranny cooler later on. Small hurdle that was easily overcome.
slowly but surely things came together, and were torqued to the specifications provided by rigidco.
Winch support installed:
winch installed on top of winch support:
complete install crappy cellphone pic that i will replace tomorrow with better one.
Only true problems i had was keeping track of all of the different mounting hardware.
I am extremely impressed by the reinforcing bracket directly below the radiator. I have not seen any other bumper manufacturer include anything similar, and I feel it adds a lot to the rigidity of the bumper, as it is off the same thickness and provides a good bracing factor to the "uniframe". lulz
