What did you do to your XJ today

[dragthatsht]

Bought a 4L10 8.8 for 250 hoping to get it in this weekend got allot to do before next month

 

[McJesse]

How do you like your KM2s? I love mine! My brother is running that same blue. Not bright enough for me. :spin3: lol

Your telling me mine is bright yellow lol

 

[Muddy Beast]

Put the hood from my white Jeep on the new rig. Spray painted it black while it was still on the old rig and it actually turned out pretty well...so there it sits.

 

[Greenz]

Found enough spare parts laying around the garage to upgrade the headlight wiring.

12awg w/relays packed back into factory wire harness. Cost $0. Wow factor with preexisting silver stars, nothing short of amazing.

 

[ECKSJAY]

Yesterday installed some IPF 4X41 bulbs (Fatboy II) to replace my (finally!) burnt out PIAA Extreme White H4s. The PIAAs were almost 6 years old and I was ready to change color temp to something with a little more contrast...

Verdict: Bright as HELL with my IPF wiring harness and multi-surface reflector lenses. Good sauce.

 

[WaXJ_Skier]

Put the hood from my white Jeep on the new rig. Spray painted it black while it was still on the old rig and it actually turned out pretty well...so there it sits.

you did this instead of going wheeling?

 

[Muddy Beast]

you did this instead of going wheeling?

Actually I did that Thursday night. Instead of wheeling I slept in, and designed my rear cargo box.

 

[AwesomeXJ]

I took the dust shields that were scrapping my rotors off. Then monted my fender flares into there higher locations. And sprayed the inside of my wheels cherry red so everytime I turn there's a flash of red.

 

[BoringDave]

Worked on my on board air/welder setup and finished my tow bar.

 

[dellstopjeep]

Modified and mounted a wj pitman for my high steer. Got some of my throw back and made my angles much closer and eliminated some bumpsteer.

80% complete with project make it more street legal by mounting a front plate using useless mag light mounts. Also mounted and wired the hella fogs so now I feel cool like everyone else in the PNW with nice lights. Figured i would show off the h4 lights as wells since they may be my favorite upgrade ever.

 

[redrider2911]

Modified and mounted a wj pitman for my high steer. Got some of my throw back and made my angles much closer and eliminated some bumpsteer.

80% complete with project make it more street legal by mounting a front plate using useless mag light mounts. Also mounted and wired the hella fogs so now I feel cool like everyone else in the PNW with nice lights. Figured i would show off the h4 lights as wells since they may be my favorite upgrade ever.

Looks nice. Real nice. How long is that license plate going to last? Or are you going to take it off once you hit the trails?

 

[dellstopjeep]

comes off on trails.... unless I forget.

 

[BPB]

Modified and mounted a wj pitman for my high steer. Got some of my throw back and made my angles much closer.......

I'm Glad to hear you got your throwback

 

[Gold Cobra]

I spent a billion dollars on rubber today.

 

[Boneless-Jeeper]

pulled apart my parts/lift kit yeep, pulled my dana 35 then immediately set fire to it and threw in my 8.8 with 4 inch lift springs ground clearence here i come ! haha

 

[fubar XJ]

I sold my '98 XJ. Now I need one of you bastards to come buy my axles and suspension and I'll be free of all things XJ.

 

[Muddy Beast]

Well I pulled the trackbar and all the goodies that go along with it and drilled the end of the crack that had formed next to it. Then I took some 1/8x4x12 steel and drilled out some holes for plug welding my "stiffener" and stitch welded the top and sides of it. Lastly I made a gusset for the trackbar brace and welded the trackbar to the new "stiffener." I'm pretty confident this will take care of all of my upper trackbar related issues for awhile. I figure if I ever notice a need for more material up front to act as stiffeners I can add some steel no problem, but for now what I have should spread the load pretty well.


IMAG0044 by schmitz516, on Flickr


IMAG0045 by schmitz516, on Flickr


IMAG0042 by schmitz516, on Flickr

It was a productive day!

Doug, I'm sure I can find a use for your rear axle while you wait for a buyer.

 

[bmfm64]

got cage all buttoned up and roll in liner done.... went to back out of garage and saw tie rod in horse shoe shape from last outting.... back in the shop it goes and fire up welder to make a new one.

 

[northwestxj]

Worked more on this:

http://naxja.org/forum/showthread.php?t=1045786

 

[mojojojo]

Worked more on this:

http://naxja.org/forum/showthread.php?t=1045786

Bad Ass

:scottm: