WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
Like wheeling?
-Alex
Yeah where we going next weekend?
What did you do to your XJ today
- Thread starter Cherokeefever
- Start date
Yeah where we going next weekend?
Made some decent progress on my rear bumper.
Mounts:
Even though I've never needed to pull a trailer before, I decided to add a receiver just in case.
Ran the d-ring tabs through the main tube to tie into the mounts.
Where I'm at so far.
Still have to bend the end pieces inward to contour to the body, taper the sides up, and make some slider bars for the low quarters. Hoping to have it installed next weekend, since my NWF to-do list isn't getting any smaller.
Mounts:
Even though I've never needed to pull a trailer before, I decided to add a receiver just in case.
Ran the d-ring tabs through the main tube to tie into the mounts.
Where I'm at so far.
Still have to bend the end pieces inward to contour to the body, taper the sides up, and make some slider bars for the low quarters. Hoping to have it installed next weekend, since my NWF to-do list isn't getting any smaller.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
Made some decent progress on my rear bumper.
Mounts:
Even though I've never needed to pull a trailer before, I decided to add a receiver just in case.
Ran the d-ring tabs through the main tube to tie into the mounts.
Where I'm at so far.
Still have to bend the end pieces inward to contour to the body, taper the sides up, and make some slider bars for the low quarters. Hoping to have it installed next weekend, since my NWF to-do list isn't getting any smaller.
How much to make me one and deliver it to NWFest?
Sniggs
NAXJA Forum User
- Location
- Western Washington
Hit the trails today. Went to Liberty and got some trail time with Howard and CoolCal - jeep climbed right up stump hill. Those trails are VERY different this time of year - lots of sloppy mud! Thanks to Howard and Cal for their time - had a lot of fun.
Thanks again to Kent 4WD for assisting with this setup. Lockers, Gears and my new KM2s? This combination ROCKS!
Thanks again to Kent 4WD for assisting with this setup. Lockers, Gears and my new KM2s? This combination ROCKS!
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
Has a little bit of bump steer so I might drill another hole in the TB bracket to raise the Jeep side mount up a little.
Believe & Receive
NAXJA Forum User
- Location
- Portland, OR
Bought me some super budget, extra triple used vintage Teraflex Quick Discos missing a bushing with a sway bar for the 60 shot. Gosh im a sucker 
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
figured out that Dana 44 upper ball joint dust boots make good 1-ton TRE dust boots also.
YoureASissy
NAXJA Forum User
- Location
- Beaverton, OR
Took it semi-wheeling for the first time - No lift + cracked valve stem = taking it easy.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
AdamGBabcock
NAXJA Forum User
- Location
- Puyallup, WA
Sorry to go back off topic again but check out what 10 seconds of CS5's 'content-aware' can do.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
Sorry to go back off topic again but check out what 10 seconds of CS5's 'content-aware' can do.
The first one looks shopped, quit putting your jeep in pictures it doesn't belong. :viking:
AdamGBabcock
NAXJA Forum User
- Location
- Puyallup, WA
Lol, definately the first one =)
:anon::banghead::viking:
:dunno::badpc:
uke::wstupid::spam::smootch:hasta:twak::hang::moon:lastara Did you guys know about the [More] button for smilies? Lol finally able to express myself properly haha
Sniggs
NAXJA Forum User
- Location
- Western Washington
Wow! I like this topic! :roflmao:
- Location
- Vancouver, WA
99 dodge steering box in the girlfriends jeep with 3/16th steel plates one both sides of the frame, and longer grade 8 bolts.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
My Project today.
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
Drove the jeep to work today and picked up my tabs/new plates. The new booster/MC combo rocks. I might switch to a slightly larger MC at some point in the future but it is still way better than the stock stuff.
Hmm, I can offer you a smoking deal on Mojo's old stock bumper?
I've even added several custom touches to it courtesy of a root ball on Waterfall, and a tree at Lyda Camp.Anyways, I plugged away at the bumper for a few hours today.
This...
Plus some of this...
Makes it look like this...
After that I tapered the ends up, and made some filler plates for the bottom. Then worked on some slider bars for under the rear quarters.
Capped the ends.
Tacked the sliders in place.
Just need to cut out some tail light fillers, and then burn it all home.
mojojojo
NAXJA Forum User
- Location
- Gresham, Oregon
burn baby burn ! lookin good Dustin !
Mc2KXJ
NAXJA Forum User
- Location
- Union of NAXJA Socialist Republics
That looks sick, Dustin. Great work!
2xtreme
NAXJA Forum User
- Location
- Kayak Pt, WA
Very nice work Dustin!!
Michael
Michael
noutlawjeeper
NAXJA Forum User
- Location
- kent, wa
Looks good. I may have missed it but have any plans for some support for the quarter panel guard area of the bumper?
