Wanted - Stock OEM H.O. - 91 to 95 camshaft

[MoFo]

I am building a budget stroker on a RENIX block. I would like to use an HO camshaft for the low RPM torque potential. Possibly somebody has built a high RPM stroker and replaced their stock cam. Please let me know if you have an OEM cam available.

TIA
MoFo

 

[OverlandZJ]

Bump..

Some one has to have one for Doug?

I'll hit the upull if i have to.

 

[vetteboy]

John, you're welcome to come pull the cam or complete motor out of that '92 parts XJ I've got. I haven't touched the motor at all.

Honestly I had someone kind of half-assed interested in the trans anyway so it might be worthwhile to just pull the whole drivetrain out...

 

[MoFo]

I just spent the last 4 hours going through consecutive years' FSMs and parts lists. I discovered, contrary to what I read here and other places, that the cam profiles are identical from 1987 through 1995. I was hopeful when I saw the 94 and 95 cams had a unique number, but they have the same profile as earlier cams. It looks like I will have to spend the bucks for an aftermarket cam with a little less duration than the one that is listed as RENIX on the Strokers calculator.

Thanks to those kind folks that offered me an OEM cam via PM.