Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
just take them off, each one is held on by 2 screws. if your getting blowby, you may need new ccv lines and grommets. you could also cut the towers shorter so there not sitting so close to the top of the head.
I have already had the cover off and cleaned everything out. The front grommet broke so I am replacing that. When I started it after the cleaning I still had blowback.
when i fixed the blowby on my 89 about 9 years ago, i went to the dealership and they had a kit that included all the lines/tubing and the elbows.
i also clean the inside of the valve cover and baffles every couple of years. IMHO, the best valve cover gasket is the felpro permaform plus. i didnt have much luck with cork gaskets or rtv