nomorecash
NAXJA Forum User
- Location
- oregon
ran new wire from batt to ignition switch and she is back alive!!!! thanks to all that helped
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
turn key and nothing at all
- Thread starter nomorecash
- Start date
- Location
- on the beach in Ocean View, VA
now go back and figure out where the loss of power came from!!
P.S. glad it's up and runnin'
P.P.S. and put a fuse in the wire you ran 'til you solve the problem permanently
P.S. glad it's up and runnin'
P.P.S. and put a fuse in the wire you ran 'til you solve the problem permanently
nomorecash
NAXJA Forum User
- Location
- oregon
i did put a fuse.. i think it was lost in the c-101 connector.. it had power before but not after. just dont have time to check right now
nomorecash
NAXJA Forum User
- Location
- oregon
yep wire corroded off. took the c-101 connector off and cleaned, regreased, and reinstalled hope all is good now
CharlesS
NAXJA Forum User
- Location
- Quezon Province, Philippines
A Jeep technician that works for a local dealership continued to have problems with his Jeeps C101 connector. After numerous time of cleaning the pins with electrical contact cleaner, wire brush and applying dielectric grease to the pins he finally did away with the C101 connector all together...
He cut the connector out, soldered and shrink tubed the connections; the problem has not reoccurred in more than 9 years....
He cut the connector out, soldered and shrink tubed the connections; the problem has not reoccurred in more than 9 years....
