Transfer case (231 or 241 rubi)

[Andrew T]

I have a 2000 4.0/auto/4x4 I need a new t-case for. It has the 231, which with the auto would mean a 23 spline input.

My first choice would be for a rubicon transfer case, but the price has to be reasonable.
Second choice is for a 231 with a SYE (not hack and tap) and driveshaft
Finally, I'd me more than happy with a standard 231. Even if it's the 21 spline, I can swap the inputs. Let me know what you have, thanks in advance.

I'm located in Houston btw.

 

[nach2103]

new to the forums man... if you want feedback feel free to look me up on ebay under nach2103.

i've got a 231 from an 84 cherokee that had the 2.8 v6 and was an auto. i'd let it go cheap if you can use it. i have front and rear driveshafts too if you need either of them. i was gonna post them on ebay tonight. feel free to email me: [email protected] if you wanna discuss further.

Brandon

 

[Lawn Cher']

I have a '97 231 from behind a AX-15, has 90k miles on it and the fluid was changed every 30k.

It has a AA HD SYE and Tera 2-low installed and hasn't been driven since the installation of these items.

I also have 2 different length Tom Woods driveshafts that I could include with the sale depending on what lift height you are running.

 

[Andrew T]

nach2103: Thanks for replying, but I'm looking for the newer style case. From the sounds of my t-case, I'm not going to be able to use much out of it.

Lawn Cher: Sounds good, I will send you a pm to discuss price

 

[nach2103]

no probs man, good luck getting one.

Brandon

 

[Andrew T]

Lawn Cher: I sent you a pm (twice)

 

[Ebrown]

I have a 231 with a sye and drive shafts set up for 4" of lift from a two door Xj

21 spline
wide chain conversion
Sye ( Not sure on MFG)
Front and rear drive shafts

PM me if your interested