TOP 5 favorite tools in your toolbox!

[XJguy]

Speaking of warranties, if you have any Milwaukee power tool and burn it out...they will fix it free of charge. I toasted mine while reaming the knuckles for some full size TREs and took it to them, they gave me essentially an all new drill relaced everything but the chuck!

XJguy

 

[RichP]

1. My 3/8" pieced together socket set
2. Power blaster
3. Gerber multi tool, never know when you might need the crimper for the odd cap now and then
4. My Big framing hammer
5. Mag lights, 3 of them, 5 D cell, 2 AA sized

 

[CaptTrev]

well, i started this (popular thread, so now i guess i get to add to it...

in no particular order. . .

1. my IR Thunder Gun 1/2" impact gun-its got a TON of balls, and often saves me from having to use a 3' breaker bar on big stuck rusty crap, oh yeah, and it sounds real cool too

2. klein tools wire stripper (the good spring loaded razor blade kind, not the ghetto pull n tug one)

3. Gearwrench set-i do a lot of work on, and rebuilding of marine diesel engines at work, and most of the bolts are fine thread SAE...so the gear wrenchs work real well

4. BFH -nuff said-

5. gerber multi-tool (usually lives in my jeep)

 

[KY Chris]

I'd need 2 lists. One for wrenching/in the garage and one for wood.

Wrenching:
1. Craftsman 1/2" breaker bar. Biggest one the sell. 18" I think? I stand on it frequently.
2. Big ball peen hammer that was my great grandfathers (can't beat the old hickory handles.
3. Klein screw drivers. The best that I have.
4. cheapo test light for trouble shooting tied with my multimeter
5. 4 1/2" Bosch angle grinder

Wood:
1. Stanley tri square
2. Lufkin rule.
3. Paslode ICT framing nailer
4. Trusty Estwing 20 oz
5. Stanley Leverlock 25' tape (best tape in my opinion)

 

[Renegade Jpr]

-Welder
-Plasma cutter
-duct tape
-zip ties
-beer