w_howey
NAXJA Forum User
- Location
- The Mudwest
This skid ONLY works on 242 equipped jeeps.
USED
$80
You pay shipping...
USED
$80
You pay shipping...
Tomken NP242 T-case skid plate
- Thread starter w_howey
- Start date
F9K9
Semper Fi
- Location
- London, KY, US
Newbie question......Will it work with a TC drop?
w_howey
NAXJA Forum User
- Location
- The Mudwest
With some modification, Yes.
The front edge attaches to the crossmember, so that wouldn't be an issue.
But the side bolts to the Uni-body rail. You would need to make some kind of spacer to fill that gap.
If you used the 1" square tube style of T-case drop, you could just make it long enough to fill the space from the plate in.
The front edge attaches to the crossmember, so that wouldn't be an issue.
But the side bolts to the Uni-body rail. You would need to make some kind of spacer to fill that gap.
If you used the 1" square tube style of T-case drop, you could just make it long enough to fill the space from the plate in.
F9K9
Semper Fi
- Location
- London, KY, US
Thanks, let me guestimate shipping and give it some thought. One thing for sure is that you'd just have to cable tie or bolt the brackets to it and ship sans carton. No need to worry about it getting dented or scratched 
w_howey
NAXJA Forum User
- Location
- The Mudwest
I checked shipping for another buying who went MIA on me. It was roughly 20 bucks to New England. I would be shipping to KY would be around the same thing will all the fuel surcharges these days.
F9K9
Semper Fi
- Location
- London, KY, US
PM sent but, don't let me stop others from buying. It is just another newbie question.
