coloradoinsane
NAXJA Forum User
- Location
- colorado
2000 xj 4.0l
Over the last 2 months I've gone through 3 of them. Bwd, oem, and cheapie. Each time I replaced it the code went away, this time no such luck. I'm getting codes p0122 and p1694 - low voltage to tps and no engine bus. I checked the wiring harness, couldn't find any rub through. I tested the wires going to the tps, the ground wasn't showing any resistance when checking ohms, (right wire) the middle wire was showing 4.67 volts(pink stripped) and the left wire was showing 5.12 volts (pink wire). When testing I had the tps unplugged. I've heard of issues with clock spring... Not sure where to start from here!
Over the last 2 months I've gone through 3 of them. Bwd, oem, and cheapie. Each time I replaced it the code went away, this time no such luck. I'm getting codes p0122 and p1694 - low voltage to tps and no engine bus. I checked the wiring harness, couldn't find any rub through. I tested the wires going to the tps, the ground wasn't showing any resistance when checking ohms, (right wire) the middle wire was showing 4.67 volts(pink stripped) and the left wire was showing 5.12 volts (pink wire). When testing I had the tps unplugged. I've heard of issues with clock spring... Not sure where to start from here!