Hello y'all. New here and wanting to see if any of you know what's up
About a month ago. i had some stalling/no pedal response. It happend for one day and never came back. No CEL
Then two weeks ago it happend again. Decided to replace TPS(Mopar) and CPS(NAPA), cleaned throttle body. The issue still happened
Went to Advanced to scan codes. Received a P0740. I went to AAMCO the next day. They said it was not Transmisson related. They didn't get a P0740 after some tests or whatever. They did get a P1698. Jeep drove fine
Took Jeep to another shop for testing. They cleared code P1698 and Jeep drove fine on their test drive. After that I went to go scan again and only the O2 code came about.Later that day the problem arose again. Thats after I reset the ECM.
Flash forward to today. The Jeep drove fine to the JY. Was able to use cruise control
Jeep drove fine to a persons house so we could do some more testing. After trying different TCM/Gauge cluster I then decided to place back old TCM in. In that process the fuel pump fuse blew. Replace that and Jeep turned on. Did reset ECM again before finding out fuse blown Drove to Advance again to scan codes. That's where I got the title codes. P0700, P0740, P1694 and the O2 codes. On the drive back to the house no stalling.
So right now I am lost and don't want to cause more issues. What is going on? Is there a part? Wire? Etc to replace?
About a month ago. i had some stalling/no pedal response. It happend for one day and never came back. No CEL
Then two weeks ago it happend again. Decided to replace TPS(Mopar) and CPS(NAPA), cleaned throttle body. The issue still happened
Went to Advanced to scan codes. Received a P0740. I went to AAMCO the next day. They said it was not Transmisson related. They didn't get a P0740 after some tests or whatever. They did get a P1698. Jeep drove fine
Took Jeep to another shop for testing. They cleared code P1698 and Jeep drove fine on their test drive. After that I went to go scan again and only the O2 code came about.Later that day the problem arose again. Thats after I reset the ECM.
Flash forward to today. The Jeep drove fine to the JY. Was able to use cruise control
Jeep drove fine to a persons house so we could do some more testing. After trying different TCM/Gauge cluster I then decided to place back old TCM in. In that process the fuel pump fuse blew. Replace that and Jeep turned on. Did reset ECM again before finding out fuse blown Drove to Advance again to scan codes. That's where I got the title codes. P0700, P0740, P1694 and the O2 codes. On the drive back to the house no stalling.
So right now I am lost and don't want to cause more issues. What is going on? Is there a part? Wire? Etc to replace?