- Location
- bourbonnais IL
Ima gonna sent youz a PM
The Roosternator
- Thread starter REWSTER
- Start date
- Location
- bourbonnais IL
got my lower C/A's on
only one bolt stuck in the stockers, luckily one of the guys was still at work and i was able to borrow his air hammer. with a couple hammers and prybars i got'em in there,the ride is about 9 times better.
it rides pretty straight down the road, so im wondering if i should wait till after wheeling in a week and a half to get an alignment.
only one bolt stuck in the stockers, luckily one of the guys was still at work and i was able to borrow his air hammer. with a couple hammers and prybars i got'em in there,the ride is about 9 times better.
it rides pretty straight down the road, so im wondering if i should wait till after wheeling in a week and a half to get an alignment.
- Location
- bourbonnais IL
got that POS muffler on...
it sounds like baby Satan farting into a well...
it sounds like baby Satan farting into a well...
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Thanks now there's mountain dew all over my desk!!!
- Location
- Bourbonnais IL.
rew has a rice burner xj...sounds like a fart can.
but more importantly than the sound or performance.........do you think it will deflect rocks and such?:laugh2:
but more importantly than the sound or performance.........do you think it will deflect rocks and such?:laugh2:
- Location
- bourbonnais IL
It shall deflect rocks and such.
- Location
- bourbonnais IL
Couple updates:
got rid of the sharty glass pack for the thrush welded muffler that john suggested a couple pages back
got some bitching horse power out of these stickers
got rid of the sharty glass pack for the thrush welded muffler that john suggested a couple pages back
got some bitching horse power out of these stickers
- Location
- bourbonnais IL
here is whats brewing from my garage that i dubed "ghettohackfab"
A pillar light brackets..
took some scrap metal
cut it to size, bent to kinda contour the A pillar
cut some angle iron up
gonna sit something like this
gotta weld err booger weld it tonight and figure out how to bolt it up there
A pillar light brackets..
took some scrap metal
cut it to size, bent to kinda contour the A pillar
cut some angle iron up
gonna sit something like this
gotta weld err booger weld it tonight and figure out how to bolt it up there
Rev Den
NAXJA Forum User
- Location
- Plainfield, IL
Bet I can tear those off on my run.....
Rev
Rev
- Location
- bourbonnais IL
Bet I can tear those off on my run.....
Rev
But then they would match the set on my bumper...
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Wered ya get those 
stickers?
stickers?Rev Den
NAXJA Forum User
- Location
- Plainfield, IL
The yellow round one is the only one that matters.
Rev
Rev
BLKBETY
NAXJA Forum User
- Location
- Gilbert, AZ
here is whats brewing from my garage that i dubed "ghettohackfab"
A pillar light brackets..
took some scrap metal
cut it to size, bent to kinda contour the A pillar
cut some angle iron up
gonna sit something like this
gotta weld err booger weld it tonight and figure out how to bolt it up there
This is the same design as Detours- Just bolt through the "A"
Pillar and stick a nut on the other end behind the plastic molding on the inside.
Great Innovation!! ! Wish I could of though of this before I forked out $100.00 to get the mounts-
- Location
- bourbonnais IL
no, his goes dum dum dum dadadum dum.
and mine goes dum dum dum dadadum dum tiss
the detors bolts all the way threw the trim?
- Location
- bourbonnais IL
Re: The Roosternator frickin update time!
so i got a little update on this thing. met Sam and my other brother Matt up at my work yesterday for a axle swapping fun day.
out with the old...
in with the new...
then on to the front..
out with the old...
swap knuckles
in with the new..
then we realized we f'ed up one of the tie rods, we were pretty tired from braking free pooploads of stuck bolts,and the shop was closing in a little over an hour so i made the choice to just leave it there for the weekend. all that is left is the one tie rod and bleeding the brakes.
so there it sat.
little specs for those who dont know.
they are d30 and 8.25 out of the chzman rig 4.10's and powertrax lockers and the 8.25 has disc brakes.
want to give a huge thanks to the cheeze for hooking me up with the deal. and a huge thanks to brad(goslowgetstuck) for picking these up for me and then storing the for like 4 months then bringing to the badlands. these are the reasons i will continue to support the MWC!
so i got a little update on this thing. met Sam and my other brother Matt up at my work yesterday for a axle swapping fun day.
out with the old...
in with the new...
then on to the front..
out with the old...
swap knuckles
in with the new..
then we realized we f'ed up one of the tie rods, we were pretty tired from braking free pooploads of stuck bolts,and the shop was closing in a little over an hour so i made the choice to just leave it there for the weekend. all that is left is the one tie rod and bleeding the brakes.
so there it sat.
little specs for those who dont know.
they are d30 and 8.25 out of the chzman rig 4.10's and powertrax lockers and the 8.25 has disc brakes.
want to give a huge thanks to the cheeze for hooking me up with the deal. and a huge thanks to brad(goslowgetstuck) for picking these up for me and then storing the for like 4 months then bringing to the badlands. these are the reasons i will continue to support the MWC!
- Location
- bourbonnais IL
by the way the light mounts got scraped. sold those hela's for bout 110% mark profit
- Location
- Columbus, In
Hey, at least i swapped my axle before you did!
- Location
- bourbonnais IL
Hey, at least i swapped my axle before you did!
Well kinda like yours, something is going on in the front end. the locker is not ratcheting around corners. so tonight im gonna pull the cover and see whats going on in there.
- Location
- bourbonnais IL
So update.
posted in the important thread that the spring kit was what was causing the front to not unlock.ordered a new kit only to find out im a retard. and ordered the wrong one
edit: let me just say, this is funny because i order parts for a living....
so being so close to wheeling the front is returning to the unlocked position till further notice.
posted in the important thread that the spring kit was what was causing the front to not unlock.ordered a new kit only to find out im a retard. and ordered the wrong one
edit: let me just say, this is funny because i order parts for a living....
so being so close to wheeling the front is returning to the unlocked position till further notice.
Last edited:
- Location
- Columbus, In
So update.
posted in the important thread that the spring kit was what was causing the front to not unlock.ordered a new kit only to find out im a retard. and ordered the wrong one
edit: let me just say, this is funny because i order parts for a living....
so being so close to wheeling the front is returning to the unlocked position till further notice.
One locker is better than none!
Similar threads
