THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

You hear what Ford said about GM?

I can't recall.
 
Re: THe NAC Lots-O-Post Thread

I'm starting to wonder if I may also have a bad cps or coil, really don't wanna have this problem pop up again at fc. Really frustrated with it.
 
Re: THe NAC Lots-O-Post Thread

Mine was a bad coil but I assumed CPS first (since I'd munched the cable a bit reinstalling the drivetrain a few months ago) so it took me an extra 10 minutes to figure that out. Glad I bought both at the parts store.
 
Re: THe NAC Lots-O-Post Thread

I'm gonna pull apart the fuel filters again as there was shit it there, and I believe I still have the sensors and coil from the blue jeep and I'll get them with the motor I'm getting from rob. The coil on the jeep is original with 195kish, and the issue wasn't super cosistant. Just wish there was someplace local for me to open it up like you can at rc.
 
Re: THe NAC Lots-O-Post Thread

There are no roads where you live?

How's the south?
 
Re: THe NAC Lots-O-Post Thread

What's the issue Rob?
 
Re: THe NAC Lots-O-Post Thread

#firstworldproblems

The powerline ethernet/wifi thing I put out in the garage is working awesome. Too awesome. In that, it's got a strong enough signal all the way inside the house that my devices won't switch over to the regular router on their own.

Pretty cool stuff though once I get that figured out. 30Mbps up/down ain't bad after ~150 feet of house conduit.
 
Re: THe NAC Lots-O-Post Thread

vetteboy said:
#firstworldproblems

The powerline ethernet/wifi thing I put out in the garage is working awesome. Too awesome. In that, it's got a strong enough signal all the way inside the house that my devices won't switch over to the regular router on their own.

Pretty cool stuff though once I get that figured out. 30Mbps up/down ain't bad after ~150 feet of house conduit.
Click to expand...

why you run two SSIDs? make it the same SSID, the main router channel 6 and the extender either 1 or 11.
 
Re: THe NAC Lots-O-Post Thread

Best way to get the glue/glass off the windshield frame? Heat gun the glue off or do I have to cut it all with a knife? I already kicked out the center just gotta clean up the edges.
 
Re: THe NAC Lots-O-Post Thread

If you cut it with a knife from the inside first, then remove the middle, most of it comes with it and it makes it pretty simple. Oh course, that isn't an option now...

A heat gun isn't going to do much I'd think. A sharp knife works well.
 
Re: THe NAC Lots-O-Post Thread

Scrap the Jeep and do us all a favor.

Also, anyone up for wheeling the backyard this Saturday?
 
Re: THe NAC Lots-O-Post Thread

Driveshaft ujoint blew out on my way to work this morning,think this is my 3rd stub shaft in the past 3 months. Guess I'm just happy it waited till after nacfest but my boss isnt too pleased
 
Re: THe NAC Lots-O-Post Thread

Colin994 said:
Driveshaft ujoint blew out on my way to work this morning,think this is my 3rd stub shaft in the past 3 months. Guess I'm just happy it waited till after nacfest but my boss isnt too pleased
Click to expand...

Axle wrap FTW!! Those leafs needs a traction bar, I always had trouble with the rear joint if I wasn't careful.
 
Re: THe NAC Lots-O-Post Thread

CTeunuch said:
Scrap the Jeep and do us all a favor.

Also, anyone up for wheeling the backyard this Saturday?
Click to expand...

Somebody has to have a trash jeep in the NAC. I'm continuing the trash jeep legacy and using the door skins off the super trash jeep Harold too.
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
261
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
361
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
246
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
307
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
227
REWSTER
REWSTER
Back
Top