THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

kastein said:
You're coming up for next weekend? Can you fit an 8.8 in the back of the XJ? I fit one in my old XJ but I forget if you have a factory fuel tank or not.
Click to expand...

If the jeeps done it will be on a trailer so I could always just throw it under the XJ.

if the jeeps not done I was going to take my car, for finacial reasons, but maybe Ill take the burb anyway and bring it back on my quad trailer
 
Re: THe NAC Lots-O-Post Thread

Jeepman401 said:
Not me, but I will scream out your name when my dick is in my gf's ass, so I will have almost the same experience
Click to expand...

Good man, we better see you in August though

ROBZ95Xj said:
i should be there Pat, you dooshbags showing up friday night?
Click to expand...

That's the plan, I'm leaving straight from work

chedisme said:
If the jeeps done it will be on a trailer so I could always just throw it under the XJ.

if the jeeps not done I was going to take my car, for finacial reasons, but maybe Ill take the burb anyway and bring it back on my quad trailer
Click to expand...

**** yeah dude, I didn't think you were going to make it!
 
Re: THe NAC Lots-O-Post Thread

Yea ill almost definitely be there im going to be getting a pretty fat check this week. Im already hit 40 hoursand its only sunday.
 
Re: THe NAC Lots-O-Post Thread

XJLI said:
All this fabricating has taught me a valuable lesson. I ****ing suck at it
Click to expand...

Only one way to get better, it's not like people are born badass fabricators.

chedisme said:
Yea ill almost definitely be there im going to be getting a pretty fat check this week. Im already hit 40 hoursand its only sunday.
Click to expand...

party1:party1:party1::party::party::party::party:party1:party1:party1:
 
Re: THe NAC Lots-O-Post Thread

CTeunuch said:
Only one way to get better, it's not like people are born badass fabricators.
Click to expand...

ya. i really suck at welding shit together... building a bunch of separate pieces and getting them all to line up. mad frustrating. bending tube though, i got really good at. i cant wait to finish this bumper and start bending tube again.
 
Re: THe NAC Lots-O-Post Thread

vetteboy said:
Hey Sam. Are you maybe thinkin about possibly trying to start planning another NH camping trip again this year?

I'd like to do that again, and maybe get some other people to show up too, heh...

(and also bother Travis to go shooting again so I can sight in my .308 at something further than 50 yards)
Click to expand...


I haven't gone shooting since like February :( Not a member there any more either, but my friend Scott is. As long as we know in advance odds are good that we could set something up probablyyyyyyyyy
 
Re: THe NAC Lots-O-Post Thread

5spd_xj said:
I haven't gone shooting since like February :( Not a member there any more either, but my friend Scott is. As long as we know in advance odds are good that we could set something up probablyyyyyyyyy
Click to expand...

I have access to some semi long distance shooting. I need some heads up to make sure I'm on my dad's good side and no one is working that day, but I could work something out.

PS. Travis, wanna go shooting or fishing next sunday?
 
Re: THe NAC Lots-O-Post Thread

Got the MJ all back together and started checking out the ram stroke to see how much I need to shim it.

Centered the ram, did an alignment, turned lock one way and marked the shaft with a sharpie, turned the other way and marked it. Turns out there's only 1/16" of leftover throw. No way that bent the arm.

Not sure if I can prove that to SOLID or not. Either way all I have left to do is weld on some reservoir tabs, spare tire mount, and finish wiring the oil cooler fan.
 
Re: THe NAC Lots-O-Post Thread

MoparManiac said:
Got the MJ all back together and started checking out the ram stroke to see how much I need to shim it.

Centered the ram, did an alignment, turned lock one way and marked the shaft with a sharpie, turned the other way and marked it. Turns out there's only 1/16" of leftover throw. No way that bent the arm.

Not sure if I can prove that to SOLID or not. Either way all I have left to do is weld on some reservoir tabs, spare tire mount, and finish wiring the oil cooler fan.
Click to expand...
just call em up and be like give me a unbent arm ***gots!
 
Re: THe NAC Lots-O-Post Thread

we got a bunch of diffrent camps coming in to eat at work this summer, one is a religous group, everyone had to get a wristband for a meal pass, well one in the group got 666, oops
 
Re: THe NAC Lots-O-Post Thread

mini=man said:
I have access to some semi long distance shooting. I need some heads up to make sure I'm on my dad's good side and no one is working that day, but I could work something out.

PS. Travis, wanna go shooting or fishing next sunday?
Click to expand...


I'd love to but i'm pretty much flat broke. Went to Ryan's wedding this weekend and even though it was free beer and wine I managed to spend a bunch. Oh and spencer's slave cylinder went out. again. so that's $500 out the window. again.

We'll see though, I'd have to wait til towards the end of the week to say for sure probably....
 
Re: THe NAC Lots-O-Post Thread

Keith has 100' of 1.75 he's looking to unload. I remember you said you were thinking about 2" or something but idk. figured its worth mentioning :)
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
148
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
237
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
150
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
184
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
120
REWSTER
REWSTER
Back
Top