THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

counting pennies hoping to make it to f&f next weekend
 
Re: THe NAC Lots-O-Post Thread

Wow, changing the oil in my mom's X3 is such a pain. There isn't even a dipstick on the engine anymore, its all computer. The owner's manual tells you nothing, I had to search bimmer forums just to find out my dad didn't buy enough oil. And its a pain in the ass canister setup. Not to mention it needs fancy pricey synthetic oil. Next time, its going to the dealer cause I don't wanna do it again.

Mercedes does that too
 
Re: THe NAC Lots-O-Post Thread

Mercedes does that too

I gave up, I couldn't figure out which plug was the oil drain either and I don't have a wrench to take off the canister top off. I told my mom for the one time she has to change the oil a year, just go to the local dealer.
 
THe NAC Lots-O-Post Thread

I think 2010+ MB S classes trigger an alarm when you open the hood. My buddy said a guy he worked with wanted to top off his washer fluid, he popped the hood and MB called him asking if everything was ok.
 
Re: THe NAC Lots-O-Post Thread

Damn fancy new cars. That's why I love my truck, the only thing the computer does is control the lights and stuff. I can remove the computer while the truck is running and continue to drive it.
 
Re: THe NAC Lots-O-Post Thread

went to the Hyundai dealer today. such an entertaining awkward experience.

1: he is showing us the car and mentions stupid shit nobody cares about "the engine cover comes standard on all models" n shit like that.

2: he says its the end of the month and he will give us his lowest price. he comes back with $4189 down and $235 a month. I pretty much told him that was bullshit and he comes back a couple times and we eventually get down to 190 a month with a grand down ( only a 12k mile lease) he tells us its cool to go over on miles because if we buy another Hyundai they just ignore all that as a gift to us. he didn't know what to say after I told him "well what if we don't want another hyundai?"

3:as we are about to leave he grabs his manager and tells him the down low on our situation. the manager comes over and offers us a 2010 Chevy cobalt with 40k miles for $1000 more down than the brand new cruze with 8 miles. with significantly higher payments, and he told us to just pay Nissan $2800 for the mile overage charge. when we said we couldn't do that he suggested deannas dad just pay that out of pocket.

(Chevy offered to buy the Nissan from Nissan and resell it on their own to get out of that $2800)
 
Re: THe NAC Lots-O-Post Thread

Got to drive a Ferrari F430 yesterday, it didn't suck.


(yes this is a picture of a picture, **** off)

 
Re: THe NAC Lots-O-Post Thread

im so ****ing jelous, did thet let you beat on it or did you have to baby it?
 
Re: THe NAC Lots-O-Post Thread

That's badass Pat. Any video?

I dropped my t-cases today. The 241 was basically not even attached to the NV4500. All the bolt bosses were stripped/cracked off.

And the 241 Sam gave me is missing the detent hardware and it's different from my 241. Lame.
 
Re: THe NAC Lots-O-Post Thread

That's badass Pat. Any video?

I dropped my t-cases today. The 241 was basically not even attached to the NV4500. All the bolt bosses were stripped/cracked off.

And the 241 Sam gave me is missing the detent hardware and it's different from my 241. Lame.

Way to go dumbass. Needs moar Atlas or Stak/TWF.
 
Re: THe NAC Lots-O-Post Thread

I threw out some much of black jeep this weekend. My dad has a dumpster here for the room hes redoing in the house, so naturally I decided it was a good time to clean up. I tossed most of interior, the roof/hatch I cut off, and soo much useless wiring and electrically things I had yanked out.
 
THe NAC Lots-O-Post Thread

You like the 241? I was told its too low at times and a doubler or stak would be better to keep the stock low ranger when 4:1 is too much.
 
Re: THe NAC Lots-O-Post Thread

I have a 241/205 doubler.

I've never actually used the 241 low range by itself (2.72:1...it's out of a Chevy). I either use the 2:1 of the 205, or the 5.44:1 low/low.
 
Re: THe NAC Lots-O-Post Thread

That's badass Pat. Any video?

I dropped my t-cases today. The 241 was basically not even attached to the NV4500. All the bolt bosses were stripped/cracked off.

And the 241 Sam gave me is missing the detent hardware and it's different from my 241. Lame.
so no truck for next weekend?
 
THe NAC Lots-O-Post Thread

went to the Hyundai dealer today. such an entertaining awkward experience.

1: he is showing us the car and mentions stupid shit nobody cares about "the engine cover comes standard on all models" n shit like that.

2: he says its the end of the month and he will give us his lowest price. he comes back with $4189 down and $235 a month. I pretty much told him that was bullshit and he comes back a couple times and we eventually get down to 190 a month with a grand down ( only a 12k mile lease) he tells us its cool to go over on miles because if we buy another Hyundai they just ignore all that as a gift to us. he didn't know what to say after I told him "well what if we don't want another hyundai?"

3:as we are about to leave he grabs his manager and tells him the down low on our situation. the manager comes over and offers us a 2010 Chevy cobalt with 40k miles for $1000 more down than the brand new cruze with 8 miles. with significantly higher payments, and he told us to just pay Nissan $2800 for the mile overage charge. when we said we couldn't do that he suggested deannas dad just pay that out of pocket.

(Chevy offered to buy the Nissan from Nissan and resell it on their own to get out of that $2800)

Sounds like Chevy is your best bet. I still think you should buy.
 
Re: THe NAC Lots-O-Post Thread

When will tou be done building mine?
Ok, Thanks, Kisses, Bye!

As soon as you bring over all the parts :D

so no truck for next weekend?

Probably not but we'll see. Everything's ready to go, just waiting on new block off plates and a DOM bushing to make a new mount there.

I have to chop the new 241, weld in the block off plates, and reassemble it all. Then weld in a new mount. I have the 4th off and Friday off as well.
 
Back
Top