THe NAC Lots-O-BFG KO2 Thread

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Yup

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

my 14 bolt spiders and carrier was welded by some retard.

ring gear is full of slag and the welds look exactly like what comes out of my nose, there is no penetration to the carrier. backlash is hella big.

 

[XBoBJ]

Re: THe NAC Lots-O-Post Thread

bullshit 5 mph drive into work. Normally i have a 25 minute commute took me 50 minutes.

 

[mini=man]

Re: THe NAC Lots-O-Post Thread

my 14 bolt spiders and carrier was welded by some retard.

ring gear is full of slag and the welds look exactly like what comes out of my nose, there is no penetration to the carrier. backlash is hella big.

Congrats. You bought a hunk of shit that you still need to regear.

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

Congrats. You bought a hunk of shit that you still need to regear.

no. i just need a carrier. ima chip the slag off the ring gear.

backlash is cake on these and the bearings are all good.

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Hopefully the pattern wasn't XXXXed.

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

Hopefully the pattern wasn't XXXXed.

the gears are huge, pinion supported, and carrier beast. im not too worried. if they hum, then that just means i need a bigger/louder engine

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

the gears are huge, pinion supported, and carrier beast. im not too worried. if they hum, then that just means i need a bigger/louder engine

Likes

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

14b are to dumb to break. Its like saying you can break a boat anchor

 

[XJLI]

14b are to dumb to break. Its like saying you can break a boat anchor

I have faith in Sam.. He can break it

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

14b are to dumb to break. Its like saying you can break a boat anchor

Anything is hard to break on jackstands

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

Anything is hard to break on jackstands

I broke a jackstand, does that count? :dunno:

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

14 bolt drums and backing plates have no value right?

k good. going in the scrap pile

 

[kastein]

Re: THe NAC Lots-O-Post Thread

I have faith in Sam.. He can break it

I want to see how long it will take for sam to blow up a 14 on 35s...

14 bolt drums and backing plates have no value right?

k good. going in the scrap pile

Sandblast them and make them into something awesome like unbreakable punch/chip bowls

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

I want to see how long it will take for sam to blow up a 14 on 35s...



Sandblast them and make them into something awesome like unbreakable punch/chip bowls

if i broke a 35 spline alloy shaft on 35's. on paper a 32 spline stock shaft of the same diameter shouldnt be much of a chore.

but it does have the whole full float thing on its side.


and LOL. i will have the large drum as the chip bowl and weld a small hyundai drum to the top of it to hold the dip.

 

[XJLI]

Re: THe NAC Lots-O-Post Thread

and LOL. i will have the large drum as the chip bowl and weld a small hyundai drum to the top of it to hold the dip.

heaviest chip bowl ever

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

heaviest chip bowl ever

manliest chip bowl ever

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

my house is going to have kitchen sinks made of dually 14bolt brake drums

 

[XJLI]

Re: THe NAC Lots-O-Post Thread

im gonna bring ballin ass salsa

 

[kastein]

Re: THe NAC Lots-O-Post Thread

If you actually do this it'll be awesome. And no one will ever tip the chip bowl over again.

They would make pretty good salad bowls too but I don't think anyone who eats salad could lift it.