THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

The fender roller is almost done. Might be rolling (and pulling) fenders by this time tomorrow.
 
Last edited:
Re: THe NAC Lots-O-Post Thread

Sweet so my Jeep decided to start going all over the road and my steering wheel was waaaay off. So I took a look thinking something with the steering came loose. Boy was I wrong.
204680_10150168731743658_510793657_6694821_4455656_o.jpg

Track bar bracket stress cracked. Got a new one shipping out to me tomorrow.
 
Re: THe NAC Lots-O-Post Thread

yayyy friday! just got to work and can't wait to leave! :)
 
Re: THe NAC Lots-O-Post Thread

What company made that bracket?
 
Re: THe NAC Lots-O-Post Thread

rweaver138 said:
i cant wait

just got home from the hospital, was in there since about 4. had some nasty stomach issues and couldn't keep any food down as well as some pain. they drugged me up ran a bunch of tests gave me an IV and sent me on my way with some meds. im hopin i'll be alright for the weekend because im going anways
Click to expand...

Your in my boat now.. My stomach is FUBARED all the time....:wierd:



I couldve had the first post today but didnt :bawl:
 
Re: THe NAC Lots-O-Post Thread

hate you guys. i just had a dream that my foa's exploded
 
Re: THe NAC Lots-O-Post Thread

Last Friday I had a dream that I got a call from my boss and he told me that I should plan on cleaning out my office on Monday. It was one of those times that the dream almost felt real since I was exhausted Friday night and I couldn't tell if I was just half asleep and I actually got that call or if it was just a dream.

Spent the whole weekend worrying that I was going to find out that it wasn't a dream after all.
 
Re: THe NAC Lots-O-Post Thread

so, after I spend a bunch of money tonight, I'm definitely going to need to buy alloys and drive slugs :thumbup:
 
Re: THe NAC Lots-O-Post Thread

So I think I'm going to try to assemble the axles completely this weekend. I don't think anything is stopping me.

Also going to try and get bumpstops front/rear done as well as finish welding all the rear mounts into place and painting the rear axle.
 
Re: THe NAC Lots-O-Post Thread

Gonna finish welding the perches and stuff on first? I know you know it's a bad idea to run that much current through bearings.

I rode to work again today. 40*F when I left my house. Only thing that gets cold are my thumbs. Having a head sock friggin rules.
 
Jeep wasn't ready til almost 2am last night.. yj water pumps are different than xj ones fyi... and the pully made love to the dirtbound fans.. so its now a 2 fan kit. Also, played drums and guitar til like 430.. my ears are still ringing.
 
Re: THe NAC Lots-O-Post Thread

asp said:
Gonna finish welding the perches and stuff on first? I know you know it's a bad idea to run that much current through bearings.

I rode to work again today. 40*F when I left my house. Only thing that gets cold are my thumbs. Having a head sock friggin rules.
Click to expand...

If he puts the ground on the perches, there really won't be much current going through the bearings.
 
Re: THe NAC Lots-O-Post Thread

asp said:
Gonna finish welding the perches and stuff on first? I know you know it's a bad idea to run that much current through bearings.
Click to expand...

Unless you're welding on one end of an axle with the ground clamp on the other end, its not too much of a big deal. As long as the path is the shortiest possible and it'll be like a foot and a half away from the center section. Place the ground clamp on the perch and burn it home. I accidently burned on my old D30 mounts across the whole axle and all was fine afterwards and for many miles. Even after welding the truss to the 60, the gears and stuff inside it still turn over fine.
 
Re: THe NAC Lots-O-Post Thread

Begster said:
If he puts the ground on the perches, there really won't be much current going through the bearings.
Click to expand...
Good point. Being smart about where the ground goes can solve a lot of problems.



Hmm...

Put an extra $100 towards my bike loan or have the $ on hand for my LTC application...
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
170
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
258
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
164
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
199
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
139
REWSTER
REWSTER
Back
Top