THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

Dundy said:
I still have those wheels Ryan.
Click to expand...
forgot about that. i don't have the cash for em, so by all means don't hold them for me.

ill letchu know
asp said:
you have 3 options for a 44. 8x6.5, 6x5.5, 5x5.5

8x6.5 is the cheapest to get hi steer and run a D60 rear. or you need to get knuckles off a 79 ford D44

6x5.5 is chevy. Works especially well with an Isuzu rear end

5x5.5 is 1/2 ton ford. they're common.

So what are you using for a rear axle and what kind of steering do you want?
Click to expand...
im lookin at 5x5.5, just doing an OTK, no hi steer and keeping my rear 44 for now. maybe someday way down the road ill bump up to a 60 rear
ROBZ95Xj said:
do 250? and get some motha XXXXin orange knuckles
Click to expand...
right now its looking like brown, rusty knuckles for me :tear:
 
Re: THe NAC Lots-O-Post Thread

rweaver138 said:
forgot about that. i don't have the cash for em, so by all means don't hold them for me.

ill letchu know

im lookin at 5x5.5, just doing an OTK, no hi steer and keeping my rear 44 for now. maybe someday way down the road ill bump up to a 60 rear

right now its looking like brown, rusty knuckles for me :tear:
Click to expand...
I've got rimz for 5x5.5!

Quick, everyone in the NAC try to hock their shit to Ryan!

In all seriousness, that's a reasonable plan.
 
Re: THe NAC Lots-O-Post Thread

chea now i just need the most important part... $money$
 
Re: THe NAC Lots-O-Post Thread

I had a torpedo heater and some weird propane heater going in the garage tonight. I was in a long sleeve and jeans. Then I ran out of propane :(
 
Re: THe NAC Lots-O-Post Thread

im putting a MM 8500 winch on my trailer for those just in case moments. I am planning on running the 12v power that charges the trailer battery to a dedicated deep cycle to run the winch. ill put a fuse on it so i dont fry the wire if the winch stalls.

any objections to that? wiring is not my strong suit so forgive me if I'm way off on this

trying to keep this on the cheap so no I'm not buying 40 ft of 2awg to run off the truck batteries
__________________
 
Re: THe NAC Lots-O-Post Thread

Id just go to the junkyard and pull some 80s dodge outers for $50. No special parts or mixing and matching.

I'd also stay 5x5.5 so you don't have to touch the rear axle, just get chromos drilled for both bolt patterns.

High steer is nice, but not 100% necessary. Getting the dodge outers leaves the option open, and I think they are drilled OTK from the factory, though not sure what size TRE they use.
 
Re: THe NAC Lots-O-Post Thread

MoparManiac said:
Id just go to the junkyard and pull some 80s dodge outers for $50. No special parts or mixing and matching.

I'd also stay 5x5.5 so you don't have to touch the rear axle, just get chromos drilled for both bolt patterns.

High steer is nice, but not 100% necessary. Getting the dodge outers leaves the option open, and I think they are drilled OTK from the factory, though not sure what size TRE they use.
Click to expand...

If he goes 8 lug he can get the coolest rear axle around, the E250 dana 60. It will cost less than chromos. Of course, everyone knows it's almost impossible to find used 8 lug wheels.
 
Re: THe NAC Lots-O-Post Thread

ya idk wtf i'm gonna do with this axle. probably just throw on whatever parts i find the cheapest
 
Re: THe NAC Lots-O-Post Thread

how much tubing ya think itll take to cage a pickemup truck cab?

i gots 72 feets a comin'
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
160
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
248
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
160
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
193
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
133
REWSTER
REWSTER
Back
Top