THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

Its not really really complicated... main roof is just a normal one, single ridgeline. A lower roof juts out from it and forms a T. So 2 valleys that come together at the peak, which is a couple feet down the middle of another face. Flashing that spot is the only thing I'm not really sure of how to do, and I haven't decided if I'm going to flash the valleys and leave them open or weave them. I have also heard of a shortcut that can be done instead of weaving but I'm not sure I want to do it.
 
Re: THe NAC Lots-O-Post Thread

Weaving is time consuming, but probably the best way if done right. 2 people running out the main part of the shingles, and 1 working in the valley.
but, you already have water and ice down, you can run out one face, overlapping it, then doing a straight cut on the top layer from the other face right down the valley
 
Re: THe NAC Lots-O-Post Thread

Begster said:
Hey Rob, some guy called those pictures of the rock stuck under my drop brackets "crappy driving."
Click to expand...
you did have to get winched a couple times that day, onl;y time ive been winched is when i was broken on those traild, so your driving must be crappy:D
 
Re: THe NAC Lots-O-Post Thread

But I wanted to try out my new winch :cry:




Edit: wait a second...

DSC_0648.jpg
 
Re: THe NAC Lots-O-Post Thread

i only did that so you wouldnt feel bad
 
Re: THe NAC Lots-O-Post Thread

Jeepman401 said:
Weaving is time consuming, but probably the best way if done right. 2 people running out the main part of the shingles, and 1 working in the valley.
but, you already have water and ice down, you can run out one face, overlapping it, then doing a straight cut on the top layer from the other face right down the valley
Click to expand...

Yeah, that's the other shortcut I heard of. Pretty sure I will go that route even though it isn't ideal, since I am likely using 30 or 50 year shingles and weaving them in this weather would be a disaster.
 
Re: THe NAC Lots-O-Post Thread

Does anybody have an old office chair that they don't need/want anymore? I'd prefer one with armrests that bolt to the bottom of the chair. I will pay CASH MONEY KIIIIID!!!
 
Re: THe NAC Lots-O-Post Thread

Check out these pinions that we just got in from a customer. Stock D30 3.07 gears.

IMG_20110103_093411.jpg


IMG_20110103_093418.jpg
 
Re: THe NAC Lots-O-Post Thread

Im somewhere in walpole doing a lift. I got to drive the big boom truck here all the way from almost the cape. I did pretty good, I only locked up the brakes once :gee:
 
Re: THe NAC Lots-O-Post Thread

The gears started to crown over toward the bearings. It's now a book end with D30 pinion #1 at the other side.
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
260
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
356
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
246
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
302
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
226
REWSTER
REWSTER
Back
Top