THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

:dunno: Bill told me it worked for him

That may be so. However, you are not a mathematics and physics god, so it doesn't apply to you and your abilities :)
 
Re: THe NAC Lots-O-Post Thread

Don't worry guys I'll go over colin's house tomorrow and lay under his comanche while he's lowering the weight on to the springs to keep an eye out to make sure nothing goes wrong.
 
Re: THe NAC Lots-O-Post Thread

Just gonna throw a couple tacks on the buckets and then slowly put weight on them with the axle on jackstands.

I think it should be fine.
i cant sress enough to be carefull, ive had me whole jeep shift sideways only missing the trackbar, it happens wicked fast
 
Re: THe NAC Lots-O-Post Thread

got a email yesterday evening saying my ruffstuff order shipped, got a email this evening saying it was canceled and they partially refunded my shipping then got another email saying it shipped again WTF!
 
Re: THe NAC Lots-O-Post Thread

so i have been working on plow trucks the past 2 days

and we have an exploded dana80 in our possession.

spider gears, clutches, crossshaft and carrier are over $2000 from the chevy dealership
sounds like you should throw an arb in it for 3/4 that and make a customer for life (if they make arbs for d80s)

Green Jeep has rear shocks that won't bottom out on the highway, and a new exhaust system with new o2 sensors. I could make it to the place to get it inspected today, but I kind of want to work on it still.
wanna go wheeling? :firedevil I need to toss a new transfer case in mine but that should take a whopping 2 hours Thursday evening or so.

I love getting a discount code email from RockAuto three days after I order a few hundred bucks worth of parts from there. oh well.
When I am ordering and this haoppens I just google for "rockauto discount code", a million forums have a coupon code thread going and someone always has one that works. Its even kosher, they say to share the code with anyone you want to and use it as much as you want to.
2nqbhuw.jpg
holy shit!





Ross's claws weren't spanked at one point in time :roflmao:

Im finally doing something about that big hole in the bottom of my 14b :D
pics

What is it with cats and their unusual fasination to lay in boxes?!?! Any box that ends up inside my house, ends up with a cat in it :dunno:

My parents cat extends this to all paper products, he will sit on sheets of paper, pieces of cardboard, notepads you are trying to use, books you are reading, etc

got a email yesterday evening saying my ruffstuff order shipped, got a email this evening saying it was canceled and they partially refunded my shipping then got another email saying it shipped again WTF!
That's kinda screwy, wonder what happened.

Got the m54a2 nearly put back together... all it needs is one more coolant manifold, wiring, the thermostat, injectors, valve lash, valve covers, and an oil change. I can't wait to drive it again.
 
Re: THe NAC Lots-O-Post Thread

Just a FYI...the coils in the picture that Rob linked are *not* the ones Colin has. Those are my 4.5" ones, as evidenced by the coil spacers on top. Changing to the airbumps meant getting rid of the spacers which needed bigger springs.

Adam has those spacers now, and those coils were last used to get something through lift inspection that needed to be shorter.
 
Re: THe NAC Lots-O-Post Thread

blam-o
 
Re: THe NAC Lots-O-Post Thread

I have a doctors appt in an hour.

I need to know where the control arm mounts go for ride height and I need to set the pinion angle/caster.

I have no idea what the 6.5" coils measure compressed under the weight of my MJ.
 
Re: THe NAC Lots-O-Post Thread

chinese fooooooood
 
Re: THe NAC Lots-O-Post Thread

Why you up Jeff! Ice cream with broccoli for the 'lil lady?
 
Re: THe NAC Lots-O-Post Thread

had to drive her to work again which means I'm up at 6...so now, I'm watching Saved by the Bell, eating breakfast, will head to drop off parts at my dealership customer and then head on in.
 
Re: THe NAC Lots-O-Post Thread

I think I'm gonna try to sit the weight of the MJ on the front 60 so I can see what the 6.5" coils give me for a ride height.

6.5", duh.


Don't worry guys I'll go over colin's house tomorrow and lay under his comanche while he's lowering the weight on to the springs to keep an eye out to make sure nothing goes wrong.

Psssh, I'll lay under there and bench press it to desired ride height.


Ross's claws weren't spanked at one point in time :roflmao:

Nah, I was working on it though. I probably only rotated those tires once, and that was only because the front hubs went to crap and the tires leaned and wore a little more on the inside.


I need to know where the control arm mounts go for ride height and I need to set the pinion angle/caster.

I have no idea what the 6.5" coils measure compressed under the weight of my MJ.

Who cares? Set the axle up for whatever location you want it at. When the Jeep is done, throw the coils in. Continue to cut the coils until you get the correct hieght.
 
Re: THe NAC Lots-O-Post Thread

Ross is a genius. 6.5" Colin. 6.5"....
 
Re: THe NAC Lots-O-Post Thread

I just found this post on jeepforum.

ive got a 4.0 5 speed with the 35 in the rear and ive gone through 2 sets of spider gears and a carrier. so i got a carrier / spider gears with the ring still on it out of a grand cherokee from the junk yard and welded the spider gears. when i put it in the diff would hardley turn but i kept driving on it. finally i went down the high way and my jeep felt super sluggish and i smelled something burning! I pulled over and my diff was so hot it was smoking! i have never seen or heard of that before but i changed the oil in it and ive got 700 mi and counting so far! i also busted a shaft and broke my weld but its still hanging on. i have a spare 35 for my jeep so im gunna give this one hell and see how much it can take but a 8.8 swap is def gunna happen some time. im tired of changing shafts and oil!!
 
Last edited:
Re: THe NAC Lots-O-Post Thread

50 degrees on New Years Day. Who's goin wheelin??

If I'm not hungover as shit and/or working on my roof, I'm down.

So wait, that guy put a new carrier in and didn't reset the backlash? I think I see his problem
 
Back
Top