THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
Re: THe NAC Lots-O-Post Thread
somthin like deez http://polyperformance.com/shop/Poly-Performance-Safety-Washers-p-21.html
somthin like deez http://polyperformance.com/shop/Poly-Performance-Safety-Washers-p-21.html
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
GHEY.
Got the wrong factory adapter housing seal from WildHorses4x4.
Advance has the right one in stock up the street from me. Dunno why the hell they would stock a double lip seal for a t-case out of a 66-72 Bronco but I'm not complaining.
GHEY.
Got the wrong factory adapter housing seal from WildHorses4x4.
Advance has the right one in stock up the street from me. Dunno why the hell they would stock a double lip seal for a t-case out of a 66-72 Bronco but I'm not complaining.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
If it's strictly a trail rig, I would aim for pinion angle over caster.
But I've HEARD of people going for anywhere from 3-6*. I have no personal experience to back that up.
If it's strictly a trail rig, I would aim for pinion angle over caster.
But I've HEARD of people going for anywhere from 3-6*. I have no personal experience to back that up.
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
Is the general consensus to drill and tap the coil buckets when doing hockey puck bumps?
Is the general consensus to drill and tap the coil buckets when doing hockey puck bumps?
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
I'd trade a half inch of wheelbase for steering clearance any day.
I cut my rear floor out with Adam tonight. I'm sort of in need of some 2x4 and 3x3x0.188 angle iron.
I'd trade a half inch of wheelbase for steering clearance any day.
I cut my rear floor out with Adam tonight. I'm sort of in need of some 2x4 and 3x3x0.188 angle iron.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
Keith: yes.
Keith: yes.
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
That's what I figured. Rob's shoe-goo method lasted the ride to FC and that was it. The rearI'm welding that shit to the axle tubes because those self tappers to the frame sucked balls.
That's what I figured. Rob's shoe-goo method lasted the ride to FC and that was it. The rearI'm welding that shit to the axle tubes because those self tappers to the frame sucked balls.
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
Eh whatever. I'll take the time to mock up a front truss at the same time for the the hell of it. It's not like I wheel much anyways so the down time doesnt mean jack.
Eh whatever. I'll take the time to mock up a front truss at the same time for the the hell of it. It's not like I wheel much anyways so the down time doesnt mean jack.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
that jeep has excellent floors except for the driver's side front. It really was only the rockers and rear unibody area that was no good.
vetteboy
NAXJA Forum User
- Location
- morganville, nj
Re: THe NAC Lots-O-Post Thread
Spent the evening adjusting valves on a 454. Hydraulic lifters, roller rockers, etc.
What a damn chore that is.
Spent the evening adjusting valves on a 454. Hydraulic lifters, roller rockers, etc.
What a damn chore that is.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
Sorry, in my opinon thats one of the biggest fixes I coudl do to my Jeep... though 2 days ago I found that my door is leaking and causing indoor puddles leading to more rust in my new floors... so i drilled a few holes to fix it and called it a day
That's pretty sweet, I checked in earlier tonight and I have listened to it (and enjoyed it) more than once :thumbup:
Mine does now
Sorry, in my opinon thats one of the biggest fixes I coudl do to my Jeep... though 2 days ago I found that my door is leaking and causing indoor puddles leading to more rust in my new floors... so i drilled a few holes to fix it and called it a dayI wish most of my floors were nice.replacing all of the floors sucked. but if anyone needs help i know what I am doing now so I can stop by with my welder and maybe double the "floor replacement" progress rate
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
x3... I can kinda whistle, tone deaf as hell though
probably fits something less archaic I guess. App list?
I'm gonna weld a nut down on my future superturdy, faster and easier than tapping and I don't like how thin the metal sheets are there
I gotta adjust the valves on the m54 still... not looking forward to it
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
Just found out that a group of people I graduated with that all hung out with eachother are all getting married. They six of them are having a combined wedding... Fawking tards.
Just found out that a group of people I graduated with that all hung out with eachother are all getting married. They six of them are having a combined wedding... Fawking tards.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
It feels like it's time to work on the jeep.
It feels like it's time to work on the jeep.
Similar threads
