THe NAC Lots-O-BFG KO2 Thread

[cmelo]

Re: THe NAC Lots-O-Post Thread

Also if you're worried about driveshafts just umm dont. It's $55 around here to have one shortened and balanced. They'll throw the Ujoints in at cost I believe as well if you need them.

 

[nhrocker]

Re: THe NAC Lots-O-Post Thread

Pssshhhh I got one before it was all the rage therefore I am not cool but my comanche is AWESOME.

I'm not cool either, but damn you're right. MJ's are awesome. I should have gotten one years ago...

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

MJ 4BT NV4500



STFU



.!..!.

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Cheap but possibly too many issues...

http://cgi.ebay.com/ebaymotors/1989...ewItemQQptZUS_Cars_Trucks?hash=item439d844c10

Waggy possibly...?

http://cgi.ebay.com/ebaymotors/1987...ewItemQQptZUS_Cars_Trucks?hash=item335a8c8fc5

 

[kastein]

Re: THe NAC Lots-O-Post Thread

No such thing as a stock SUA 8.25

I know, I'm buying one sometime next month They're very similar in pinion length to a D44 though, and I figured someone might know what the length should be offhand if they had the same setup so I could just get my driveshaft set up right the first time.

Also if you're worried about driveshafts just umm dont. It's $55 around here to have one shortened and balanced. They'll throw the Ujoints in at cost I believe as well if you need them.

Seriously? Wow, not bad, I might have to go for that, the prices I was seeing were way worse than that. I know there is a 4.0/whatever manual went into it/231/d35 MJ rear shaft in Sam's right now because I had a feeling they were going to crush that MJ they had like 5 months ago soon and removed it and stashed it only a few days before they ended up doing so though. If anyone needs it I can tell you guys where it is.

MJ's are awesome. I should have gotten one years ago...

Exactly my thoughts as soon as I drove it... they're just plain awesome unless you have to bring more than one passenger around.

 

[cmelo]

Re: THe NAC Lots-O-Post Thread

Cheap but possibly too many issues...

http://cgi.ebay.com/ebaymotors/1989...ewItemQQptZUS_Cars_Trucks?hash=item439d844c10

Waggy possibly...?

http://cgi.ebay.com/ebaymotors/1987...ewItemQQptZUS_Cars_Trucks?hash=item335a8c8fc5

For a second I thought it was going to be a FSJ Waggy. Almost crapped my pants with the thought of you driving a FSJ.

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

For a second I thought it was going to be a FSJ Waggy. Almost crapped my pants with the thought of you driving a FSJ.

440 > NV4500 > Atlas waggy on tons?

 

[cmelo]

Re: THe NAC Lots-O-Post Thread

Colin, you would be my hero if you had that. Remember, that dana 60 you have would drop right into a waggy. Bolt up a dana 300 and go. While you beat on it build that 440 on the side...

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

Blown 401 pushing 1600 HP

 

[billyjp2]

Re: THe NAC Lots-O-Post Thread

Waggy possibly...?

http://cgi.ebay.com/ebaymotors/1987...ewItemQQptZUS_Cars_Trucks?hash=item335a8c8fc5

do it do it do it do it

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Colin, you would be my hero if you had that. Remember, that dana 60 you have would drop right into a waggy. Bolt up a dana 300 and go. While you beat on it build that 440 on the side...

No need to build it up on the side.

440 > 727 (4wd one) sitting in the ramcharger right now i guarantee my dad would give me (already said he would)

My uncle could get me cheap aluminum heads, intake, cam, blah blah.

 

[kastein]

Re: THe NAC Lots-O-Post Thread

Cheap but possibly too many issues...

http://cgi.ebay.com/ebaymotors/1989...ewItemQQptZUS_Cars_Trucks?hash=item439d844c10

Waggy possibly...?

http://cgi.ebay.com/ebaymotors/1987...ewItemQQptZUS_Cars_Trucks?hash=item335a8c8fc5

Issues I see:
Rust. Not cool. You can patch the floor, you probably won't have rockers soon anyways, the bed I would worry about.
You can swap *everything* else over. Hell, take the full wiring harness out of Tinky Winky and jam it in the MJ - or buy a 97+ that's been totaled by a rear end collision for junkyard prices and swap everything over if you like the 97+ styling, I forget if you do.

That waggy looks nice too.

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

but i wouldn't buy anything like a tube bender, i mean kinker, QUOTE]

i got the 16 ton pipe bender on sale for like $70

I havent used it much, but it bent my trackbar (dom) with ease. kinks the hell out of schedule 40 though (PIPE WHICH THE BENDER IS MADE FOR)

might try to modify it to be used as a press break. i usually do the notch metal and bend/fill with weld method with success though

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

yippie, an update. maybe i should be cool and put a link in my sig.

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

me thinks me gonna order a couple radiators for both me jeeps tomorow, Travis if ya wanna still give me that rad ill still take it ill keep it for backup, i think ill also order oil pan and valvr cover gaskets, rear main, intake gasket and driveplate bolts for both, well i was oprah rich

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

me thinks me gonna order a couple radiators for both me jeeps tomorow, Travis if ya wanna still give me that rad ill still take it ill keep it for backup, i think ill also order oil pan and valvr cover gaskets, rear main, intake gasket and driveplate bolts for both, well i was oprah rich

CSF 3-row?

 

[Skreed]

Re: THe NAC Lots-O-Post Thread

poor boner

 

[billyjp2]

Re: THe NAC Lots-O-Post Thread

poor boner

?

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

CSF 3-row?

yess, one for each

 

[rweaver138]

Re: THe NAC Lots-O-Post Thread

?

x2