- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
responsible budget management, brought to you buy "the other buyer" on craigslist...
responsible budget management, brought to you buy "the other buyer" on craigslist...
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
I'm hungry.
I'm hungry.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i figured out why my dryer trips the circuit... pics to follow.
i figured out why my dryer trips the circuit... pics to follow.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
sweet. use something other than photobucket so i dont need to wait 6 hours to see them :laugh3:
sweet. use something other than photobucket so i dont need to wait 6 hours to see them :laugh3:
ktm racer 419
NAXJA Forum User
- Location
- ROW DIALIN
Re: THe NAC Lots-O-Post Thread
oh and i got some carrier bearings through work because they usually gimme timkens.
but i got skf madei n china bearings and wanted to make sure there are no horror stories using them
oh and i got some carrier bearings through work because they usually gimme timkens.
but i got skf madei n china bearings and wanted to make sure there are no horror stories using them
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
hahhahahahahaha awesome
hahhahahahahaha awesome
asp
NAXJA Forum User
- Location
- Westport, MA
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
okey dokey
okey dokey
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
...yeah, that's to code.
...yeah, that's to code.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
oh yay i can see them
...yikes!
oh yay i can see them
...yikes!
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
so i've pretty much decided, that if i don't get the full compression in the 7100s i want to lower the lower front shock mounts, kind of like this:
this should be able to balance out the necessary bracket to be able to run the heim joints on the top of the shock.
...... Ross (and Mark's TIG) or anyone else, want to help out with this sometime soon, after the shocks come in and I figure out exactly where to put them? There's beer in it for you!
so i've pretty much decided, that if i don't get the full compression in the 7100s i want to lower the lower front shock mounts, kind of like this:
this should be able to balance out the necessary bracket to be able to run the heim joints on the top of the shock.
...... Ross (and Mark's TIG) or anyone else, want to help out with this sometime soon, after the shocks come in and I figure out exactly where to put them? There's beer in it for you!
asp
NAXJA Forum User
- Location
- Westport, MA
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
Sadly, I've seen worse... and fixed worse... which was illegal as I am not a licensed electrician. I figured since I was doing it to code (for real) it wouldn't really be an issue though.
Oh god.
Sadly, I've seen worse... and fixed worse... which was illegal as I am not a licensed electrician. I figured since I was doing it to code (for real) it wouldn't really be an issue though.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
haha, that's after i cleaned it some, too.
haha, that's after i cleaned it some, too.
asp
NAXJA Forum User
- Location
- Westport, MA
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
Re: THe NAC Lots-O-Post Thread
thats ahell of a crawl ratio on that last link
thats ahell of a crawl ratio on that last link
ktm racer 419
NAXJA Forum User
- Location
- ROW DIALIN
Re: THe NAC Lots-O-Post Thread
should i be concerned that i was able to pull my old carrier bearings off my spool by hand?
i was gettin it in the vice to take the ring gear off and it just... separated. bearing didn't spin or anything. the axle has maybe 25k miles and over 2 years on it since the rebuild. and everything else is minty fresh.
i did put the bearings in the toaster to aid in installing them due to lack of a press however
should i be concerned that i was able to pull my old carrier bearings off my spool by hand?
i was gettin it in the vice to take the ring gear off and it just... separated. bearing didn't spin or anything. the axle has maybe 25k miles and over 2 years on it since the rebuild. and everything else is minty fresh.
i did put the bearings in the toaster to aid in installing them due to lack of a press however
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
I feel the need to start shopping for 300s or a couple 231s
I feel the need to start shopping for 300s or a couple 231s
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i want a 300. a 231 mated to a 300 seems to be the easiest/cheapest.
i want a 300. a 231 mated to a 300 seems to be the easiest/cheapest.
Similar threads
