5spd_xj
<<the good ol days
- Location
- Dracut, MA
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
FIFY
As far as allnighters I'll be pulling one on Friday night most likely. The longest I did was 3 days straight and for one month I worked a 7:30am-3:30pm job, went to school from 5pm-8pm and then worked 11pm-7am job. School was only 4days a week but the jobs were weekly. I would take half days, vacation, or just hide on the job to sleep. Luckily both jobs had places to hide as the day job was ground maintenance at BSC and the night job was in a warehouse full of clothes, the fur coats were the best to sleep in.
I wasn't aware that was a problem? Truck lasts just as long as a gasser, then when the shell is junk, find a Ford to dump the drivetrain in. Then you'll have a real truck!
FIFY
As far as allnighters I'll be pulling one on Friday night most likely. The longest I did was 3 days straight and for one month I worked a 7:30am-3:30pm job, went to school from 5pm-8pm and then worked 11pm-7am job. School was only 4days a week but the jobs were weekly. I would take half days, vacation, or just hide on the job to sleep. Luckily both jobs had places to hide as the day job was ground maintenance at BSC and the night job was in a warehouse full of clothes, the fur coats were the best to sleep in.
XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
Re: THe NAC Lots-O-Post Thread
anyone selling bushwackers for cheap?
anyone selling bushwackers for cheap?
Last edited:
Re: THe NAC Lots-O-Post Thread
i gotta get into the garage and toss the d30 shaft i got from ross into a hub then into my jeep i aint wheelin anytime soon but i rather have it in now then not have one when the snow comes and i gotta swap my frt driveshaft and maybee get ujoints
i gotta get into the garage and toss the d30 shaft i got from ross into a hub then into my jeep i aint wheelin anytime soon but i rather have it in now then not have one when the snow comes and i gotta swap my frt driveshaft and maybee get ujoints
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
Edit: Just checked and my dynomax exhaust is on vehicle for delivery from the facility one town over from me... hopefully it's there when I get home. I want to do the exhaust before I put floors back in. Figure it will be easier than putting exhaust on after welding in floors.
I was supposed to be off but got dragged in. No big deal, I planned to leave... erm... right now. But now I just keep getting more **** thrown at me to do. I feel like I should just leave and say f*** it. I'm sure people would love that
Edit: Just checked and my dynomax exhaust is on vehicle for delivery from the facility one town over from me... hopefully it's there when I get home. I want to do the exhaust before I put floors back in. Figure it will be easier than putting exhaust on after welding in floors.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
my dad will probably buy a ford. he found a loaded 95 f250 with a 7.3 Powerstroke he likes. maybe a newer 250/350 with the gasser 5.4. he likes some of the chevy/gmc's out there. he said hes never been big on the dodge's interior and looks and stuff, i dunno.
my dad will probably buy a ford. he found a loaded 95 f250 with a 7.3 Powerstroke he likes. maybe a newer 250/350 with the gasser 5.4. he likes some of the chevy/gmc's out there. he said hes never been big on the dodge's interior and looks and stuff, i dunno.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
Wow, that thing's tweaked pretty bad
EDIT: just one hour till I get the hell out of here and hit the junkyard... then sleep
Wow, that thing's tweaked pretty bad
EDIT: just one hour till I get the hell out of here and hit the junkyard... then sleep
Last edited:
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
UGH FML!!! went to airgas earlier and was talkin with the guy about plamsas. was checkin out the cutmaster 52; list price near like 2000, current deal price of 1500. they had a last years model with a special edtion camo case that they just sold at their cost for 900 and change cause it was jsut sitting around!!!! i woulda sooo bought that!!!!
guess ill just be picking up a another couple 10 pks of cutoff wheels to cut the truss with instead
UGH FML!!! went to airgas earlier and was talkin with the guy about plamsas. was checkin out the cutmaster 52; list price near like 2000, current deal price of 1500. they had a last years model with a special edtion camo case that they just sold at their cost for 900 and change cause it was jsut sitting around!!!! i woulda sooo bought that!!!!
guess ill just be picking up a another couple 10 pks of cutoff wheels to cut the truss with instead
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
:doh: that really sucks. See if there are any other airgas locations nearby? I know there's one on rt20 out in Worcester, I keep meaning to get some mig gas there but never remember to when they're open.
... hmmm... it's right down near the junkyard... I guess I'll go today!
:doh: that really sucks. See if there are any other airgas locations nearby? I know there's one on rt20 out in Worcester, I keep meaning to get some mig gas there but never remember to when they're open.
... hmmm... it's right down near the junkyard... I guess I'll go today!
XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
Approximately 3:30. Sam's as usual, I'll be moving between the XJ and ZJ/WJ rows - I need to pick up some d35 brake hardware and a d35 diff cover for the MJ. Anyone know off the top of their head what size the 12pt bolt holding the crosspin for a d35 is? 1/4"?
Approximately 3:30. Sam's as usual, I'll be moving between the XJ and ZJ/WJ rows - I need to pick up some d35 brake hardware and a d35 diff cover for the MJ. Anyone know off the top of their head what size the 12pt bolt holding the crosspin for a d35 is? 1/4"?
XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
junkyard closes at like 4:30 these days :/ it blows, I try to make it a few mornings a week since they don't care and let me in at 7:30 even though the gate opens at 8, I failed at that hardcore this week.
junkyard closes at like 4:30 these days :/ it blows, I try to make it a few mornings a week since they don't care and let me in at 7:30 even though the gate opens at 8, I failed at that hardcore this week.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
uke:
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
x2
My interior is pretty damn comfy...? :dunno:
x2
My interior is pretty damn comfy...? :dunno:
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
For those who havent seen this, check out the serious CRAWL at 6:23. I want those tires.
http://www.youtube.com/watch?v=e0OlkKMdppo&feature=related
For those who havent seen this, check out the serious CRAWL at 6:23. I want those tires.
http://www.youtube.com/watch?v=e0OlkKMdppo&feature=related
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
DAMN
http://wbztv.com/local/thanksgiving.holiday.traffic.2.1334420.html
DAMN
http://wbztv.com/local/thanksgiving.holiday.traffic.2.1334420.html
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Re: THe NAC Lots-O-Post Thread
i think Colin should leave work at 10 again...he'd get home at the same time.
i think Colin should leave work at 10 again...he'd get home at the same time.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i spent most of my day running an angle grinder and air chisel removing corking from a torpedo harness
i spent most of my day running an angle grinder and air chisel removing corking from a torpedo harness
Similar threads
