THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

ugnnghhh school work. can't wait to wheel this weekend. it's looking like by the time saturday night / halloween actually rolls around i'll be tired of halloween parties / events anyways so i won't have to go too crazy-like and can get my ass in gear sunday morning
 
Re: THe NAC Lots-O-Post Thread

The neighbors must love you :D

what'd you get anyways? I know you bought the MJ, but I didn't hear about this other pile of treasures that is rumored to have appeared


i think i could almost put together another jeep with all this stuff!
dash
grill
tailgate
new gauge assembly
renix emissions stuff
jeep floor mats
new gas tank+straps
gas tank skid
rock ratz rails for the cab and bed
front hitch reciever
appears there is stuff to change to open cooling
fuse box and harness
headlight
some type of light bar, gotta look at it again
extra switches
all new coolant hoses
couple sway bars
tdrag link
tie rod
u joints
driveshaft for 8.8 with trac loc
said 8.8 with tracloc(with a Bay State sticker.if i rock it, i should prob join)

ummmm
and other doohiggies and whatchmacallits.
i feel like a kid on christmas morning!
:roll:
 
Last edited:
Re: THe NAC Lots-O-Post Thread

i think i could almost put together another jeep with all this stuff!
massive pile of awesome

ummmm
and other doohiggies and whatchmacallits.
i feel like a kid on christmas morning!
:roll:
holy crap, that is like christmas and a birthday all in one
 
Re: THe NAC Lots-O-Post Thread

i see a work party in the near future.
to do-
-wipers stay on
-mount bed and cab rails
-wiring for the directionals needs attention,the blinkers and possibly more have a bad ground or a short i believe.
-column needs to be switched out
-probably throw the 8.8 in. it has a lincoln locked non-c-clip 35 right now(although i may wheel it for a bit)
-steering issue
-mount tsl's
-front hitch reciever
-re seal things


and then wheel it!!!
 
Last edited:
Re: THe NAC Lots-O-Post Thread

i see a work party in the near future.
to do-
-wipers stay on
-mount bed and cab rails
-wiring for the directionals needs attention,the blinkers and possibly more have a bad ground or a short i believe.
-column needs to be switched out
-probably throw the 8.8 in. it has a lincoln locked non-c-clip 35 right now(although i may wheel it for a bit)
-steering issue
-mount tsl's
-front hitch reciever
-re seal things


and then wheel it!!!


I'm in:cheers:
 
Re: THe NAC Lots-O-Post Thread

nice. i figure if travis brings his new chainsaw, we can cut up a few trees and have some beers by the firepit after, and cook some meat.
i also have about a dozen pallets to burn too.
 
Re: THe NAC Lots-O-Post Thread

ill be junking the blue 90 four door very soon,maybe this week.
anyone need anything?
renix motor(103,00), interior,or a 2wd beam?
 
Re: THe NAC Lots-O-Post Thread

count me in! depending on whether I'm in the state or not.

as for parts... is the top end of the driver side A-pillar, where it joins the roof up for grabs? Mine's rusting out and I want to chop one open and figure out how bad it could have gotten inside before just grinding it and covering it with bondo. :looney:
 
Re: THe NAC Lots-O-Post Thread

count me in! depending on whether I'm in the state or not.

as for parts... is the top end of the driver side A-pillar, where it joins the roof up for grabs? Mine's rusting out and I want to chop one open and figure out how bad it could have gotten inside before just grinding it and covering it with bondo. :looney:

Good Idea. you can have basically the windshield frame, I'll take from there back. :)
 
Re: THe NAC Lots-O-Post Thread

Not sure yet. Maybe, maybe not.

If I do, I have to skip out on Hollands Saturday to make sure the brake controller and everything works on the truck.

I'm assuming there's a place for trailers/etc?

if UJ is entering the powerlines where we did a couple weeks ago, I wouldnt suggest trailering... the road leading to the clearing for trailer parking was washed out nicely, Chip in DWE has a sweet '44 flatty on one tons (seen in the pic I posted a couple pages ago) and had his Chevy 2500 pulling his trailer down that road. He bottomed out the hitch more than once...
 
Re: THe NAC Lots-O-Post Thread

i see a work party in the near future.
to do-
-wipers stay on
-mount bed and cab rails
-wiring for the directionals needs attention,the blinkers and possibly more have a bad ground or a short i believe.
-column needs to be switched out
-probably throw the 8.8 in. it has a lincoln locked non-c-clip 35 right now(although i may wheel it for a bit)
-steering issue
-mount tsl's
-front hitch reciever
-re seal things


and then wheel it!!!

I forgot I had another steering box for it if you need it. Im not sure if you xj has one. Also I dont think the rail is gonna mount too well on the pass. side before doing something over there. Also add reseal the slider to that list unless thats under reseal.

i think i could almost put together another jeep with all this stuff!
dash
grill
tailgate
new gauge assembly
renix emissions stuff
jeep floor mats
new gas tank+straps
gas tank skid
rock ratz rails for the cab and bed
front hitch reciever
appears there is stuff to change to open cooling
fuse box and harness
headlight
some type of light bar, gotta look at it again
extra switches
all new coolant hoses
couple sway bars
tdrag link
tie rod
u joints
driveshaft for 8.8 with trac loc
said 8.8 with tracloc(with a Bay State sticker.if i rock it, i should prob join)

ummmm
and other doohiggies and whatchmacallits.
i feel like a kid on christmas morning!
:roll:

Baystate Offroad is the shop that built the axle. http://baystateoffroad.com/
 
Re: THe NAC Lots-O-Post Thread

if UJ is entering the powerlines where we did a couple weeks ago, I wouldnt suggest trailering... the road leading to the clearing for trailer parking was washed out nicely, Chip in DWE has a sweet '44 flatty on one tons (seen in the pic I posted a couple pages ago) and had his Chevy 2500 pulling his trailer down that road. He bottomed out the hitch more than once...


We are not going in that way. the road we are going on is perfectly graded and we had one guy drive his truck and trailer down it no problem
 
Re: THe NAC Lots-O-Post Thread

pm me directions/a description. I'm curious :)
 
Re: THe NAC Lots-O-Post Thread

What color is the interior?
its the grey, and pretty decent.


count me in! depending on whether I'm in the state or not.

as for parts... is the top end of the driver side A-pillar, where it joins the roof up for grabs? Mine's rusting out and I want to chop one open and figure out how bad it could have gotten inside before just grinding it and covering it with bondo. :looney:
hack away. the windshield is cracked anyway.
back hatch and all other glass is ok if anyone needs replacements.

Good Idea. you can have basically the windshield frame, I'll take from there back. :)
np.

ill be taking stuff off it and bouncing back and forth between jeeps for the next two days.:repair:
No Work!!!:guitar:
 
Re: THe NAC Lots-O-Post Thread

I forgot I had another steering box for it if you need it. Im not sure if you xj has one. Also I dont think the rail is gonna mount too well on the pass. side before doing something over there. Also add reseal the slider to that list unless thats under reseal.



Baystate Offroad is the shop that built the axle. http://baystateoffroad.com/
i may need it,ill let u know.
i almost forgot you mentioned the rear window!thanks!!!
i finally got everything organized!!!

i kinda felt like i just came from an all u can carry, except i got waaay more stuff!!!
 
Back
Top