THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

:woohoo: mah new rims will be here Monday!! Ill have to go mount all the Treps up Tues or Wed at my old garage.



Bitchin, now I gotta find a couple nice days in a row to pull the axles outta my shop, strip the 60 carrier, clean them up, clean out the tubes, and shoot some primer all over them. then, ill assemble the outers back on the axles and be able to mock mount up the new shoes and slide it all under the jeep.
 
Re: THe NAC Lots-O-Post Thread

ok, that is def a challenge and i accept

ITS ON!!! as soon as i finish black jeep, ill just go there and unload the virgin jeep right at the base of gatekeeper. I'll procced to apply full throttle and not stop until the turn around. test run complete.
 
Re: THe NAC Lots-O-Post Thread

ITS ON!!! as soon as i finish black jeep, ill just go there and unload the virgin jeep right at the base of gatekeeper. I'll procced to apply full throttle and not stop until the turn around. test run complete.

and no bitchin out on the harder lines.
 
Re: THe NAC Lots-O-Post Thread

anyone want some stocks frt 60 shafts and/or knuckles from a 87 ford 60

I've got a spare set but depending on what you want for it all I could be persuaded. I could take em tomorrow but won't be able to have cash for you, could send paypal at some point if we don't meet again soon.

I dunno. Maybe next spring? Winter runs with no doors, windshield, or heat bring the suck.

Maybe I'll even throw the insurance back on it for a lil while...it was fun living out of it for 3 days while I was up there. I haven't talked to a bunch of those guys in a long time (some old school UJ people...Joe, Dean, Marty, Bobcat).

Sweetness. I'm sure Billy can line stuff up. I haven't seen Marty in forever since he continuously has excuses not to come wheeling :(.



I WANNA GO WHEELIN :rattle:

We could do some cool DWE stuff too ;)

whats some sizes youre interested in Anthony? ill probably talk with everybody tonight at Colin's and see what people want.

2x6x.250" rect tubing for rockers
2x2x.250" square tubing for support legs
3x3x.188" angle for stiffeners ??
some pieces of .250" plate ??
what else do you people want?


I want some 3x3x.188" angle, I dunno how much. Depends on pricing I guess. I don't need a whole lot but hey who knows. Lemme know how much per foot and what potential lengths are good for you and we'll figure it out
 
Re: THe NAC Lots-O-Post Thread

I want some 3x3x.188" angle, I dunno how much. Depends on pricing I guess. I don't need a whole lot but hey who knows. Lemme know how much per foot and what potential lengths are good for you and we'll figure it out

its cheap, ill get you alot for a little :rtm:
 
Re: THe NAC Lots-O-Post Thread

the full lengths i get are 48 ft. I usually get the plate in 12" wide pieces by like 8 or 10 ft lengths
hmm ok, I guess I meant that I want 24' lengths...

for 1/8" plate I'd take 3 12" wide pieces.

eh, what the hell, I'll take some 3x3x0.188" too. the same 24'
 
Re: THe NAC Lots-O-Post Thread

hmm ok, I guess I meant that I want 24' lengths...

for 1/8" plate I'd take 3 12" wide pieces.

eh, what the hell, I'll take some 3x3x0.188" too. the same 24'

:thumbup:


ill talk to everybody tonight and get some ideas of what everyone wants and try and figure everything out and get some estimates out there for prices/lengths.
 
Re: THe NAC Lots-O-Post Thread

its cheap, ill get you alot for a little :rtm:

cool. I might go for one 24' section, maaayyyyyybe two, but I don't see why I'd need more than one. Hell I probably need less than one, but extra is always nice :cheers:
 
Re: THe NAC Lots-O-Post Thread

and the rk deavers arent as awesome as the full blown deavers

orly? the RK guy on the phone said they were the same. anyway, the only thing id get is just the 4 link upgrade from the. i dont need discos, a trackbar, brake lines and all that other crapola.

of course!!! maybe ill just do it blindfolded. my passenger can only say three words; "left", "right", and "floor it".

i support this.

oh, and i learned that pre 97 bumpers are different than 97+ ones. but i got to use the sawzall so its ok. JF TBM complete, one my buddy gets home from work and i can get into his garage to get my hellas i'll go out and take piczorz
 
Re: THe NAC Lots-O-Post Thread

Ross, Did you happen to fill my tanks?
 
Re: THe NAC Lots-O-Post Thread

orly? the RK guy on the phone said they were the same. anyway, the only thing id get is just the 4 link upgrade from the. i dont need discos, a trackbar, brake lines and all that other crapola.

why are the rk leaves cheap, and the deaver leafs $750?

and anthony has rk leaves he is selling/sold and they are DEF NOT the $750 4" deaver packs.

and mabell is 20 minutes at a leisurely pace with 2 rigs. 4 mins solo is def achievable
 
Re: THe NAC Lots-O-Post Thread

i love tire threads.

everyone posts the only offroad tire they have ever run and say its the bomb-diggity.
 
Re: THe NAC Lots-O-Post Thread

why are the rk leaves cheap, and the deaver leafs $750?

and anthony has rk leaves he is selling/sold and they are DEF NOT the $750 4" deaver packs.
No, they definitely are not. Deaver leafs have about 10 leafs and military wrap too AFAIK. Mine are just.. i dunno, flexy?
 
Back
Top