The LongArmXJ Build! !

[_LongArmXJ_]

Tie rod, Drag link, and my track bar. All 1.5 .25 DOM

 

[_LongArmXJ_]

 

[_LongArmXJ_]

 

[_LongArmXJ_]

Not completely done but you get the idea

 

[_LongArmXJ_]

 

[_LongArmXJ_]

 

[_LongArmXJ_]

 

[XJRN]

What did you do for a rear drive shaft?

 

[_LongArmXJ_]

I already had sye and a tom woods shaft. Just had to get a combo u joint to mate it to the rear yoke. Napa part number p353

 

[XJRN]

It seems like my front shaft i had in the rear with the 8.25 is going to be too long with the 60.

 

[_LongArmXJ_]

I also had a 8.25 in before. I just went out and made a rough measurement. From center of u joint at the 60 yoke to the center of the u joint at the yoke on the 231 is ROUGHLY 32 inches. Give or take maybe a half inch, its dark and had a female holding the light lol. hope that help you. I have a 231 w a sye btw.

 

[Trixie03]

Do you have the part numbers for the tie rod ends you used when you built your steering on the dana 30? Thinking of doing something like that on mine. Good looking jeep btw.

 

[jakeWI]

looks pretty good. Liking that rear storage.

 

[_LongArmXJ_]

Ill look up the part numbers for the tre's

 

[_LongArmXJ_]

http://www.jcroffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=1TNST&Category_Code=S6

 

[Customizer1000]

Lookin good!! Can't wait till sat, should we invite ken? Lol