Takin' orders - OBA brackets (fits HO) and swaybar extension brackets

[Clean Racing]

Put me down for a set of the 2" extended links for the sway bar please... Thanks..

 

[Eddie G.]

Put me down for a pair of extented links, one York mount and a pair of Odyssey 1200A batteries. And a cheapie 6V deep cycle battery, too!

 

[Kejtar]

bracket and swaybar stuff

 

[gcurtis]

Just an FYI, I've not forgotten about you all.

We will be putting the design into the computer on Saturday and doing a test run/build. Should be in production by mid next week.

Be forewarned, it may have my initials cut into it somewhere.

 

[gcurtis]

PS - still working on the battery pricing for Odyssey stuff.

 

[cbremer]

put me down for a set of swaybar extensions and possibly an odyssey PC1200MJT (depending on price). i might even be able to pick up in person, unless shipping is cheaper than gas

 

[99xjache]

Hey Grant,
I sure could use a pair of those sway bar brackets. Are they 1 or 2" extensions? How do we get the money to you?
Do you need prepay or pay at pickup?

Aaron



edit for typo's

Could you add me to the list for the oba bracket too? I think I just found a compressor

Thanks
Aaron

 

[89xjrick]

put me down for a set of 2" sway bar end links.

 

[gcurtis]

put me down for a set of swaybar extensions and possibly an odyssey PC1200MJT (depending on price). i might even be able to pick up in person, unless shipping is cheaper than gas

My price on the Odyssey will beat that of any retailer, online or in person, for sure, I'll be sacraficing margin to gladly and aggressively serve the Jeep community. I'll be giving a smokin' deal to Jeep folks, one price for pick up and the other for shipped.

 

[mikeyl]

hey grant. put me down for the sway bar brackets. also i am thinking of putting a spare battery in the spot where the old filter box was the run the winch and other stuff. all i need is to figure a decent bracket to hold it.
thanks

 

[itsHud]

Please put me down for a set of swaybar brackets.

Thanks,
Ken

 

[Eddie G.]

My price on the Odyssey will beat that of any retailer, online or in person, for sure, I'll be sacraficing margin to gladly and aggressively serve the Jeep community. I'll be giving a smokin' deal to Jeep folks, one price for pick up and the other for shipped.

And I am sure the Jeep community appreciates it and hopefully will make it up to you in some other ways, like putting forcebatteries.com stickers on the XJs and word-of-mouth advertising! Got any cool stickers?!

 

[GSequoia]

And I am sure the Jeep community appreciates it and hopefully will make it up to you in some other ways,

Beer and strippers?

 

[Eddie G.]

Sounds better than stickers!!

 

[Mike L]

Are the sway bar brackets going to be similar to the Teraflex ones that weld to the inner knuckle? That is really where they need to be located off of, or at least the passenger side to clear everything. Or maybe that is with my setup.

Installation

-Mike

 

[gcurtis]

Are the sway bar brackets going to be similar to the Teraflex ones that weld to the inner knuckle? Or maybe that is with my setup.


-Mike

Sounds like that is your set up. They will be simple links at the quoted price.

 

[gcurtis]

While taking longer than expected, we are well under way.

Checked into aluminum radiators and they may be cost prohibitive locally. Mattson's is $700+ without shroud. Scott, how much is BCI?

 

[corbinafly]

Grant, the BCI rads are $499 from Summit. That's where Scott and I were thinking of ordering from.

Kyung

 

[gcurtis]

Grant, the BCI rads are $499 from Summit. That's where Scott and I were thinking of ordering from.

Kyung

Let's see if we can work a three pack. I'll have Mattson's shroud it.

 

[rpraterxj]

Hey Grant,

What's the status of the sway bar mounts?

Thanks,
Robert