steering pop when turning

[RCP Phx]

PM sent

 

[IslanderOffRoad]

I see you're in Atlanta.

I'd go hit up the SEC chapter forum and see if someone can meet up with you and take a look.

 

[xactorocker]

I see you're in Atlanta.

I'd go hit up the SEC chapter forum and see if someone can meet up with you and take a look.

ah ok ill take a look thanks

 

[RCP Phx]

First piece of advice you will get is to not buy RC parts!

 

[CMNCHE]

That would not have anything to do with your steering. Get a pic of your steering angles, at that height you need a trackbar and drop bracket to fix that.

False...Tight u joints on the axles can cause a return to center issue and popping when turning.

 

[xactorocker]

False...Tight u joints on the axles can cause a return to center issue and popping when turning.

ok so I will look into replacing the u joints is this a job I can so at home or will I need to take it to a shop

 

[xactorocker]

False...Tight u joints on the axles can cause a return to center issue and popping when turning.

thanks again for the help

 

[RCP Phx]

False...Tight u joints on the axles can cause a return to center issue and popping when turning.

Possible but not likely, the OP already re-located the trackbar making the angles even worse, combine that with fixed lca's........

 

[xactorocker]

the lower control arms are angled not stock size but I'm thinking I should look at a adjustable trac bar and u joints anything else?

 

[RCP Phx]

The angle in the lca's means absolutely nothing. Your going to need some "good" adjustable arms with the same for a trackbar/drop mount.

 

[RCP Phx]

BTW, you should be looking at new uca's and control arm drop brackets.

 

[xactorocker]

BTW, you should be looking at new uca's and control arm drop brackets.

ok i will thanks again for the help getting rid of one of the pops now i just gotta trouble shoot to find the other one.

 

[xactorocker]

well i just repalced the upper control arm bushing because they seem to move alot and they still seem to shift back and forth and im going to also try and upload a video of my issue to see if anyone can see more from that. thanks
https://photos.app.goo.gl/e8VZddMWLo3WEztE6